It is never pleasurable to listen to a sound on your car you don’t where it comes from. So what if you establish a timing belt noise that persists on your GMC Yukon XL? It is highly plausible that this is a small trouble, but before being sure, it is better to carry out some investigations. If this belt noise comes from your timing belt, our team has written this content page to support you find and adjust it. First, we will look at the timing belt noises on your GMC Yukon XL and then we will look at the causes for these noises.
Noise of timing belt GMC Yukon XL
The timing belt has a crucial role to play. It acts as a conductor and synchronizes the engine crankshaft to the camshaft. It assures the correct transmission of movement to the valves and pistons, which must open at specific moments. It is the link between the top and bottom of the engine. It is sorely tested and wears out with time, it is up to you to respect the manufacturer’s suggestions to replace it at the right moment, we usually talk about years or mileage to respect. Otherwise, you could be the victim of a engine failure.
I notice a timing belt loud noise on my GMC Yukon XL after replacement
If you notice a loud whistling sound that does not reduce on the timing belt of your GMC Yukon XL, it can be relating to a circular saw sound. It is more than possible that you will have to worry about it rapidly. This can come up as a result of a poorly performed belt replacement. Indeed, some professionals want to save time and do not follow the manufacturer’s stress specifications. Indeed, to change a timing belt you must first lock the engine in a certain procedure, with the right equipment. Then, when the belt is reassembled, you will have to manage its tension and comply with the manufacturer’s standard. To do this, we will use a tool called a tensiometer, but unfortunately some garages or professionals do not apply themselves to one of these two tasks, which actually causes major issues for the automobile owner. This leads to an over-tension of the timing belt which is even greater when hot and may eventually break. Bear in mind to take your automobile to a professional to validate and resolve this mistake. If, after verifying, this loud noise does not come from your timing belt, read this content page on loud noises on GMC Yukon XL for more details about it. In the other hand, it could be a serpentine noise on GMC Yukon XL that you encounter.
I listen to belt noises squealing or squeaking that increase GMC Yukon XL
Finally, if you notice asound from your GMC Yukon XL’s timing belt, it is important to take care of it and take your automobile to your technician or risk engine failure. The cause for this noise is often an end-of-life belt that starts to degrade inside the engine motor and whose flaps begin to knock against the inside of the timing gearbox. Hurry to your auto mechanic. The replacement of a timing belt kit must always be done in advance as part of normal automobile maintenance. If you wait until the failure arises, it will be too late because the result of a timing belt failure is the failure of your engine. We will generally take this opportunity to change the accessory belt, the tensioning rollers that manage the tension of the belt and the water pump system. If you’re lucky and this noise doesn’t come from your timing belt, take a look at our content page on squeaking noise on GMC Yukon XL.
