It happens sometimes that your automobile makes noises in the brake calipers, you are certainly not reassured by this sorts of noise and you instantly tend to think that you will have an accident or that the fix will cost you an substantial amount of money. So, what if you discover noise from the brake calipers on your Chevrolet Colorado? It most likely is not anything severe and you may be able to solve it yourself, but when in doubt, since your safety and the one of others is in question, it is better to verify before a more serious failure occurs. It is with this in mind that we have made the decision to write this content and give you the chance to find the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Chevrolet Colorado, and give you the causes for them in order to help you resolve the problem.
The different types of brake caliper noise on Chevrolet Colorado and their causes
The function of the Chevrolet Colorado brake calipers is to come pinch the brake discs of your Chevrolet Colorado thanks to the pads they will activate. This element is an essential element of your vehicle’s safety. Experiencing a noise from it must therefore be analyzed immediately and leaving it lying around is not a good alternative.
I hear a grinding noise on my brake calipers on Chevrolet Colorado
If you perceive a grinding or scrap metal noise coming from the brake calipers of your Chevrolet Colorado, it is highly possible that it will be connected to brake pads at the end of their existence, in fact, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each company gives an average runtime in kilometres for pads, but according to your driving style and route, this may change. Remove the wheels in question and check the wear indicator on them. If they are expired, they must be swapped quickly as they will very easily ruin your discs and keep doing this scrap or grinding noise on Chevrolet Colorado. If after examining this point, you’re still feeling a grinding noise on your Chevrolet Colorado, have a look at this article to find a solution.
I experience a frequent noise that stops when I brake from my Chevrolet Colorado brake calipers
If you are the victim of a continuous noise in the brake calipers of your Chevrolet Colorado that only stops when you press your brake system, it is quite conceivable that caliper wear is the reason. Indeed, they can jam after some time, especially if they are not employed enough. When this happens, they will tend to stay in the closed position, so they will always stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Chevrolet Colorado
If in your case, you experience a vibration when braking that would have come from the brake calipers of your Chevrolet Colorado, you will have to worry about the condition of your discs. Discs tend to wear over time and although they have a much longer life than pads, they must be substituted at some point. A vibration most often shows of veiled brake disc, you can check it by disassembling your wheels. If so, change them or have them replaced by your technician.
When I brake, I experience a squealing in my brake calipers of my Chevrolet Colorado
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Chevrolet Colorado, producing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
