It appears in some cases that your automobile makes noises in the brake calipers, you are rarely reassured by this kind of noise and you automatically tend to think that you will have an incident or that the repair will cost you an astronomical amount. So, what if you find noise from the brake calipers on your Subaru Forester? It is probably not some thing serious and you may be able to repair it yourself, but when in doubt, since your safety and the one of others is in question, it is better to examine before a more serious failure occurs. It is with this in mind that we have made the decision to create this article and give you the opportunity to find the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Subaru Forester, and give you the reasons for them in order to help you resolve the trouble.
The different types of brake caliper noise on Subaru Forester and their causes
The objective of the Subaru Forester brake calipers is to come pinch the brake discs of your Subaru Forester thanks to the pads they will activate. This element is an essential element of your vehicle’s safety. Discovering a sound from it must therefore be analyzed right away and leaving it lying around is not a good choice.
I hear a grinding noise on my brake calipers on Subaru Forester
If you listen to a grinding or scrap metal noise coming from the brake calipers of your Subaru Forester, it is highly imaginable that it will be linked to brake pads at the end of their life, actually, the function of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each producer gives an average runtime in kilometres for pads, but based on your driving style and route, this may change. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be changed quickly as they will promptly ruin your discs and keep doing this scrap or grinding noise on Subaru Forester. If after checking out this point, you’re still going through a grinding noise on your Subaru Forester, have a look at this article to find a solution.
I encounter a continuous noise that stops when I brake from my Subaru Forester brake calipers
If you are the victim of a continuous noise in the brake calipers of your Subaru Forester that only stops when you press your brake system, it is quite plausible that caliper wear is the cause. Indeed, they can jam with time, especially if they are not used enough. In such a case, they will tend to remain in the closed position, so they will constantly stick the pads against the discs, which will lead to an increase in consumption and premature deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Subaru Forester
If in your case, you encounter a vibration when braking that would have come from the brake calipers of your Subaru Forester, you will have to get worried about the state of your discs. Discs tend to wear over time and although they have a much longer life than pads, they must be changed at some point. A vibration most often informs of veiled brake disc, you can check it by removing your wheels. If so, replace them or have them replaced by your auto mechanic.
When I brake, I encounter a squealing in my brake calipers of my Subaru Forester
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Subaru Forester, producing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
