Frequently discovering noises from your car is never pleasant, so discovering wiper sounds on your Audi Q3 can be troubling. This symptom may be an indication of a slight problem as well as a warning of a slight repair to come. No matter the reason, it is imperative to check the origin and take the necessary actions to correct the problem, it is with this in mind that we wanted to produce this content to support you see more clearly. We will first check out the possible reasons and solutions for dealing with noise from your wipers on your Audi Q3. Then, in a second step, we will give you some suggestions to prevent this type of noise from happening again.
Wiper blades that makes a squeaking or rubbing noise on Audi Q3
A wiper noise on your Audi Q3, whether it is a squeak noise or rather a rubbing noise on your windshield, is not pleasant and can distract your concentration while you are driving. It is imperative to fix such a noise. Moreover, a wiper blade noise is commonly the sign of a future failure of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.
Explanations and solutions for wiper noise on your Audi Q3
- Examine the wear of your wiper blades. This is the most general reason of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Reflect on replacing them in both circumstances.
- Dirty windshield, verify the level of your windshield washer fluid. One of the triggers of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may perceive a wiper noise on your Audi Q3, it is up to you to clean it with your windshield washer fluid if sufficient, otherwise use sodium bicarbonate to clean it, it is very practical.
- Examine that your wiper blades are well installed. Indeed, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can verify these two points.
- Examine the tightness of the wiper arm mechanism and that the friction between the windshield and the wipers is not too high. Indeed, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your Audi Q3 shows up.
Some basic recommendations to limit wiper blades noise on your Audi Q3
Finally, we will give you some recommendations and warnings to help you extend the life of your wipers and prevent unwanted noise they may create during their lifetime.
- Never use dishwashing liquid as windshield washer fluid. Indeed, the purpose of the dishwashing liquid is not to wash windows, additionally if you wanted to use it for this task, you would have to rinse abundantly because it creates a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore encounter an increase in the noise of these.
- Do not wax your windshield, the film that the wax will make may prevent you from seeing the road properly. Indeed, this oily film will develop a veil and prevent you from draining water through your windshield wipers in a normal way.
- Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
- Since dirt is the main reason for the noise produced by your windshield wipers, we suggest you not to drive in puddles after storms or heavy rain. Indeed, the puddles will inevitably be full of dirt that will end up on your windshield and trigger noise or destroy to your windshield wipers.
