Constantly experiencing noises from your vehicle is never pleasant, so experiencing wiper sounds on your Infiniti QX60 can be distressing. This symptom may be a symptom of a slight issue as well as a warning of a slight repair to come. No matter the reason, it is important to check the source and take the necessary measures to resolve the issue, it is with this in mind that we desired to create this article to support you see more clearly. We will first have a look at the conceivable causes and solutions for dealing with noise from your wipers on your Infiniti QX60. Then, in a second step, we will give you some suggestions to prevent this type of noise from occurring again.
Wiper blades that causes a squeaking or rubbing noise on Infiniti QX60
A wiper noise on your Infiniti QX60, whether it is a squeak noise or rather a rubbing noise on your windshield, is not pleasant and can distract your focus while you are driving. It is important to eliminate such a noise. In addition, a wiper blade noise is usually the indication of a future malfunction of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.
Causes and solutions for wiper noise on your Infiniti QX60
- Verify the wear of your wiper blades. This is the most regular cause of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Reflect on changing them in both circumstances.
- Dirty windshield, examine the level of your windshield washer fluid. One of the triggers of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may perceive a wiper noise on your Infiniti QX60, it is up to you to clean it with your windshield washer fluid if suitable, otherwise use sodium bicarbonate to clean it, it is very effective.
- Verify that your wiper blades are well installed. Indeed, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can examine these two points.
- Verify the tightness of the wiper arm system and that the friction between the windshield and the wipers is not too high. Indeed, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your Infiniti QX60 comes out.
Some general suggestions to limit wiper blades noise on your Infiniti QX60
To finish , we will give you some recommendations and warnings to help you extend the life of your wipers and prevent unwanted noise they may cause during their lifetime.
- Never use dishwashing liquid as windshield washer fluid. Indeed, the purpose of the dishwashing liquid is not to wash windows, furthermore if you wanted to use it for this objective, you would have to rinse abundantly because it creates a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore encounter an increase in the noise of these.
- Do not wax your windshield, the film that the wax will make may prevent you from seeing the road properly. Indeed, this oily film will develop a veil and prevent you from draining water through your windshield wipers in a normal way.
- Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
- Since dirt is the main explanation for the noise made by your windshield wipers, we encourage you not to drive in puddles after storms or heavy rain. Indeed, the puddles will inevitably be full of dirt that will end up on your windshield and cause noise or damage to your windshield wipers.
