Repeatedly listening noises from your car is never pleasant, so listening wiper sounds on your GMC Yukon can be distressing. This indication may be a symptom of a small trouble as well as a warning of a small fix to come. In any case, it is necessary to check the origin and take the necessary measures to resolve the trouble, it is with this in mind that we decided to prepare this content to support you see more clearly. We will first look at the plausible causes and solutions for dealing with noise from your wipers on your GMC Yukon. Then, in a second step, we will give you some recommendations to prevent this type of noise from going on again.
Wiper blades that causes a squeaking or rubbing noise on GMC Yukon
A wiper noise on your GMC Yukon, whether it is a squeak noise or rather a rubbing noise on your windshield, is not pleasant and can distract your attention while you are driving. It is important to stop such a noise. Moreover, a wiper blade noise is mostly the indication of a future malfunction of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.
Explanations and solutions for wiper noise on your GMC Yukon
- Examine the wear of your wiper blades. This is the most common reason of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Reflect on changing them in both circumstances.
- Dirty windshield, verify the level of your windshield washer fluid. One of the causes of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may listen to a wiper noise on your GMC Yukon, it is up to you to clean it with your windshield washer fluid if appropriate, otherwise use sodium bicarbonate to clean it, it is very practical.
- Examine that your wiper blades are well situated. In fact, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can verify these two points.
- Examine the tightness of the wiper arm mechanism and that the friction between the windshield and the wipers is not too high. In fact, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your GMC Yukon shows up.
Some general suggestions to limit wiper blades noise on your GMC Yukon
To finish , we will give you some recommendations and warnings to help you extend the life of your wipers and avoid unwanted noise they may cause during their lifetime.
- Never use dishwashing liquid as windshield washer fluid. In fact, the purpose of the dishwashing liquid is not to wash windows, furthermore if you wanted to use it for this reason, you would have to rinse abundantly because it triggers a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore experience an increase in the noise of these.
- Do not wax your windshield, the film that the wax will create may prevent you from seeing the road properly. In fact, this oily film will generate a veil and prevent you from draining water through your windshield wipers in a normal way.
- Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
- Since dirt is the main explanation for the noise made by your windshield wipers, we recommend you not to drive in puddles after storms or heavy rain. In fact, the puddles will inevitably be full of dirt that will end up on your windshield and trigger noise or deteriorate to your windshield wipers.
