Constantly finding out noises from your automobile is never enjoyable, so finding out wiper sounds on your Chevrolet Tahoe can be disturbing. This indicator may be an indicator of a minor problem as well as a warning of a minor service to come. In any case, it is imperative to find the source and take the necessary measures to correct the problem, it is with this in mind that we desired to compose this content to help you see more clearly. We will first have a look at the plausible causes and solutions for dealing with noise from your wipers on your Chevrolet Tahoe. Then, in a second step, we will give you some recommendations to prevent this type of noise from occurring again.wiper-blades-noise-chevrolet-tahoe

Wiper blades that produces a squeaking or rubbing noise on Chevrolet Tahoe

A wiper noise on your Chevrolet Tahoe, whether it is a squeak noise or rather a rubbing noise on your windshield, is not enjoyable and can distract your focus while you are driving. It is imperative to eliminate such a noise. In addition, a wiper blade noise is mostly the indicator of a future failure of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.

Causes and solutions for wiper noise on your Chevrolet Tahoe

  • Check the wear of your wiper blades. This is the most common reason of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Reflect on swapping them in both cases.
  • Dirty windshield, verify the level of your windshield washer fluid. One of the triggers of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may hear a wiper noise on your Chevrolet Tahoe, it is up to you to clean it with your windshield washer fluid if suitable, otherwise use sodium bicarbonate to clean it, it is very practical.
  • Check that your wiper blades are well placed. Indeed, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can verify these two points.
  • Check the tightness of the wiper arm mechanism and that the friction between the windshield and the wipers is not too high. Indeed, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your Chevrolet Tahoe appears.

Some basic recommendations to limit wiper blades noise on your Chevrolet Tahoe

Finally, we will give you some advice and warnings to help you increase the life of your wipers and prevent unwanted noise they may reason during their lifetime.

  • Never use dishwashing liquid as windshield washer fluid. Indeed, the purpose of the dishwashing liquid is not to wash windows, moreover if you wanted to use it for this task, you would have to rinse abundantly because it makes a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore experience an increase in the noise of these.
  • Do not wax your windshield, the film that the wax will make may prevent you from seeing the road properly. Indeed, this oily film will make a veil and prevent you from draining water through your windshield wipers in a normal way.
  • Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
    • Since dirt is the main reason for the noise generated by your windshield wipers, we encourage you not to drive in puddles after storms or heavy rain. Indeed, the puddles will inevitably be full of dirt that will end up on your windshield and cause noise or destroy to your windshield wipers.