If you too have already feel a grinding noise on Fiat 500, you must have asked yourself the same questions as all Fiat 500 owners. We are rarely reassured when a grinding noise shows up on our automobile. As we are conscious of your concerns and questions, we have made a decision to write this content page to be able to assist you in and ease your investigation for a solution to your problem. To do this, first we will see what the origins of a grinding noise on Fiat 500 are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Fiat 500 that comes from the shock absorbers and to finish from one of your doors.grinding-noise-fiat-500

I notice a grinding noise on Fiat 500 once I turn the wheel

First, we will have a look at the grinding noises on Fiat 500 that happen once you turn the wheel of your automobile. Here are the main explanations for this:

  • Hydraulic system

    • If you hear grinding noises on your Fiat 500 once you turn the wheels, it may be related to the hydraulic system of your automobile that allows you to operate the entire power steering part. In such a case, the main point to examine is the power steering fluid level, which if below the normal level could be an indication of a leak of the system. In this case, think about to redo the level and examine it regularly. If the problem is persistant, go to your technician.

  • Bearings

    • “A grinding noise on Fiat 500 once I turn the wheels of my automobile” can also result from premature wear of your bearings. Indeed, bearings play an essential role in the good behaviour of the automobile when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can generate sounds close to a grinding if they are worn. Think about to examine their condition.

  • Steering pump

    • Finally, a grinding noise on Fiat 500 once I turn may be relating to a tired steering pump power steering pump. The objective of this organ is to operate the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may appear between it and the belt. Please remember to examine that it is working properly.

    If despite these different solutions you continue to encounter a grinding noise on Fiat 500 when turning your steering wheel, we have wrote a complete article content on this subject that can help you locate the origin.

    I acknowledge a grinding noise on Fiat 500 once braking

    If you notice a grinding noise from the brakes of your Fiat 500, it is highly possible that it will be linked to brake pads at the end of their life, actually, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but depending on your driving style and route, this may vary. Take out the wheels in question and examine the wear indicator on them. If they are dead they will have to be swapped promptly because they will promptly damage your discs.
    If, despite check, your grinding noise on Fiat 500 does come from your brakes but is not related to the pads, examine this content page to find out the other possible origins of brake noises on Fiat 500.

    I notice a grinding noise on Fiat 500 at the shock absorbers

    If you are in the scenario where you discover the grinding noise on Fiat 500 as coming from the damping part of your automobile, whether you are driving over a retarder, on a bumpy road, or simply once you change direction and the vehicle’s mass is swung from one side to the other. In cases like this, there are several explanations that can justify this noise. Indeed, you will have to examine some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to examine that there is no oil leaking from your shock absorbers.
    • You may experience abnormal wear and tear on one of the seals. This would trigger an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will make a grinding noise on Fiat 500

    at each compression.
    Once you have inspected all these elements, you should have found the origin of your trouble, go to your mechanic to fix the faulty part. If you have not identified the origin of your problem, we recommend highly that you have a look at this content page which discusses all possible origins of shock absorber noise on Fiat 500.

    I notice a grinding noise on Fiat 500 at a door

    If that’s not enough, don’t hesitate to look at this complete content page on door sounds on Fiat 500.
    It is possible, depending on the type of noise you experience, that the hinge of your door is at the source of these noises. If this is the case, you will have to examine it by opening your door and checking out that the grinding noise on your Fiat 500 comes from a hinge that is too dry. To resolve this problem, first try to grease the hinge, in most cases this is enough to solve your problem. If that’s not enough, don’t hesitate to read this complete content page on door sounds on Fiat 500.