If you too have already feel a grinding noise on Nissan Cube, you must have wondering the same questions as all Nissan Cube owners. We are rarely reassured when a grinding noise happens on our car. As we are conscious of your concerns and questions, we have decided to create this content page in order to assist you in and facilitate your quest for a answer to your problem. To do this, first we will see what the origins of a grinding noise on Nissan Cube are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Nissan Cube that originates from the shock absorbers and to finish from one of your doors.grinding-noise-nissan-cube

I listen to a grinding noise on Nissan Cube every time I turn the wheel

First, we will look into the grinding noises on Nissan Cube that happen when you turn the wheel of your car. Here are the main explanations for this:

  • Hydraulic system

    • If you are subject to grinding noises on your Nissan Cube every time you turn the wheels, it may be related to the hydraulic system of your car that allows you to run the entire power steering part. In such a case, the main point to examine is the power steering fluid level, which if below the normal level could be an indicator of a leak of the device. In this case, bear in mind to redo the level and examine it regularly. If the problem continues, go to your technician.

  • Bearings

    • “A grinding noise on Nissan Cube every time I turn the wheels of my car” can also result from premature wear of your bearings. Indeed, bearings play an essential role in the good behaviour of the car when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can make sounds close to a grinding if they are worn. Remember to examine their condition.

  • Steering pump

    • Finally, a grinding noise on Nissan Cube every time I turn may be relating to a tired steering pump power steering pump. The goal of this organ is to operate the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may arise between it and the belt. Keep in mind to examine that it is working properly.

    If despite these different solutions you continue to notice a grinding noise on Nissan Cube when turning your steering wheel, we have created a complete content page on this subject that can support you find the origin.

    I notice a grinding noise on Nissan Cube every time braking

    If you listen to a grinding noise from the brakes of your Nissan Cube, it is highly imaginable that it will be related to brake pads at the end of their life, actually, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but based on your driving style and route, this may vary. Take off the wheels in question and examine the wear indicator on them. If they are dead they will have to be replaced almost instantly because they will almost instantly damage your discs.
    If, despite crontrol, your grinding noise on Nissan Cube does come from your brakes but is not related to the pads, examine this content to find out the other conceivable origins of brake noises on Nissan Cube.

    I listen to a grinding noise on Nissan Cube at the shock absorbers

    If you are in the situation where you identify the grinding noise on Nissan Cube as coming from the damping part of your car, whether you are driving over a retarder, on a bumpy road, or simply every time you change direction and the vehicle’s mass is swung from one side to the other. In this case, there are several explanations that can justify this noise. Indeed, you will have to examine some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to examine that there is no oil leaking from your shock absorbers.
    • You may encounter abnormal wear and tear on one of the seals. This would cause an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will create a grinding noise on Nissan Cube

    at each compression.
    Once you have checked out all these points, you should have found the source of your issue, go to your mechanic to fix the defective component. If you have not found the source of your problem, we would suggest that you have a look at this content which discusses all possible origins of shock absorber noise on Nissan Cube.

    I listen to a grinding noise on Nissan Cube at a door

    If that’s not enough, don’t hesitate to look at this complete content on door sounds on Nissan Cube.
    It is conceivable, depending on the kind of of noise you acknowledge, that the hinge of your door is at the origin of these noises. If this is the case, you will have to examine it by opening your door and verifying that the grinding noise on your Nissan Cube comes from a hinge that is too dry. To resolve this problem, first try to grease the hinge, in most cases this is enough to solve your problem. If that’s not enough, don’t hesitate to have a look at this complete content on door sounds on Nissan Cube.