It occurs occasionally that your automobile makes noises from your brakes, you are rarely reassured by this kind of noise and you automatically tend to think that you will have an incident or that the repair will cost you an substantial amount of money. So, what if you discover noise from the brake on your Subaru Legacy? It most likely is not anything serious and you should have the ability to repair it yourself, but when in doubt, as with such problem your safety and the one from other is in question, it is better to examine before a more serious failure occurs. It is with this in mind that we have chosen to compose this article and give you the chance to locate the problem and find a solution. We will go through several steps, review all possible origins of brake noise on Subaru Legacy, and give you the causes for them in order to help you resolve the problem.brake-noise-subaru-legacy

The several types of brake noise Subaru Legacy and their origins

The function of the Subaru Legacy brakes is to come slow down and stop your automobile. This component is an fundamental part of your vehicle’s safety. Hearing a sound from it must therefore be examined immediately and leaving it lying around is not a good solution.

I listen a grinding noise on my brake Subaru Legacy

If you hear a grinding or scrap metal noise coming from the brake of your Subaru Legacy, it is highly possible that it will be linked to brake pads at the end of their life, indeed, the function of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each company gives an average runtime in kilometres for pads, but depending on your driving style and route, this may change. Take out the wheels in question and examine the wear indicator on them. If they are dead, they must be changed quickly as they will quickly damage your discs and keep doing this scrap or grinding noise on Subaru Legacy. If after looking at this point, you’re still encountering a grinding noise on your Subaru Legacy, have a look at this article to find a solution.

I feel a continuous noise that stops when I brake with my Subaru Legacy

If you experience a constant noise from the brakes Subaru Legacy that only ends when you press your brake system, it is quite conceivable that caliper wear is the cause. In fact, they can jam over time, especially if they are not used enough. In such a case, they will tend to remain in the closed position, so they will always stick the pads against the discs, which will lead to an rise in consumption and precipitate deterioration of your pads. To verify it, try to brake many times frankly to try to unblock them. If this does not work, it will be necessary to think about swapping them.

I feel vibration when I brake with my Subaru Legacy

If in your case, you feel a vibration when braking that would have come from the brake your Subaru Legacy, you will have to worry about the condition of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be swapped at some point. A vibration most often notifies of veiled brake disc, you can examine it by removing your wheels. If so, change them or have them replaced by your auto mechanic.

I notice a squealing noise when I brake with my Subaru Legacy

Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Subaru Legacy, producing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).