Sometimes your vehicle can make noises in the front axle, you are very certainly not reassured by this sort of noise and you immediately tend to presume that you will lose a wheel or that the repair will cost you an astronomical sum. Thus, what if you identify a noise coming from the front end of your Audi Q5? It may not be much and you can resolve the problem yourself, but if in doubt it is better to examine before a larger failure occurs. It is with this in mind that we have decided to write this document and allow you to locate the problem and find a treatment. We will, through some steps review all the elements that can make noises at the front end of your Audi Q5. 
What are the elements that can cause front axle noise Audi Q5?
Most of our work will focus on finding the element that gives your Audi Q5 front wheel noise. The following is a list of the components that are most likely to be generating it and how to confirm it.
Noise vibration front end Audi Q5 : the shock absorber cup
One of the most classic causes of symptoms on your Audi Q5 front axle noise is advanced wear and tear on your suspension system. Indeed, the suspension cups, when they are out of date, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer assumes its role and during small jolts that compress the suspensions. To examine if this is the problem that concerns you, take a dented, slow-speed road and focus on the noise coming from your front end as you pass over holes. If these are the cups, consider swapping them quickly as this may affect other components and require more expensive repairs.
Noise while turning front end Audi Q5 : stabilizer bar
If you recognise of a noise on your Audi Q5 at the level of the front end when you are turning flat or climbing on sidewalks for example, it is most likely connected to one of the parts of your stabilizer bar that is malfunctioning. To confirm the origin of the problem, you may feel a lack of stability in the direction of the car (it pulls to the left or it pulls to the right). Also, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels vigorously, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are out of date. In this case, go to your garage.
Front axle noise when turning Audi Q5 : direction triangles
Finally, you may have a noise in the front wheel on your Audi Q5, when you accelerate, brake or in a rather random but regular way. It is likely that the cause of this problem comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (left triangle pulls to the left) and when braking towards the inside of the same side (left triangle pulls to the right). You can also examine the state of the swivel bellows visually, which may disrupt the action of changing direction. If you are in one of these cases go to your technician.
Loud noise front end Audi Q5 : bearings
One of the other likely origins of symptoms of the front axle of your Audi Q5, may be that one of your rollings is tired, it will tend to make a thumping noise that intensifies when it is under stress (turns faster and faster). So make sure to examine by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case swap it or them quickly. If, on the other hand, this noise only happens with an engaged speed, refer to our article on loud noise on Audi Q5, you will probably find a response to your problem.
Front end noise squeaking Audi Q5 : cardan shaft
One of the most common causes when noise happens on the front axle of your Audi Q5 when you turn with your car is in connection with the direction of your car. In fact, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you get closer to the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Audi Q5, do not hesitate to consult this article to find the solution to your problem.
