In some cases your car can make noises in the front axle, you are very rarely reassured by this sorts of noise and you automatically tend to presume that you will lose a wheel or that the fix will cost you an astronomical sum. So, what if you identify a noise coming from the front end of your Chevrolet Impala? It may not be much and you can fix the problem yourself, but if in doubt it is better to verify before a larger failure happens. It is with this in mind that we have chosen to produce this document and allow you to find the problem and find a treatment. We will, through different steps review all the elements that can produce noises at the front end of your Chevrolet Impala. 
What are the elements that can cause front axle noise Chevrolet Impala?
Most of our article will focus on finding the element that gives your Chevrolet Impala front wheel noise. The following is a list of the components that are most likely to be causing it and how to verify it.
Noise vibration front end Chevrolet Impala : the shock absorber cup
One of the most likely reason of symptoms on your Chevrolet Impala front axle noise is advanced wear and tear on your suspension system. Indeed, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer assumes its role and during small jolts that compress the suspensions. To verify if this is the problem that concerns you, take a dented, slow-speed road and listen to the noise coming from your front end as you pass over holes. If these are the cups, think about replacing them as soon as possible as this may affect other parts and require more pricey repairs.
Noise while turning front end Chevrolet Impala : stabilizer bar
If you detect of a noise on your Chevrolet Impala at the level of the front end when you are turning flat or climbing on sidewalks for example, it is most likely linked to one of the parts of your stabilizer bar that is defective. To verify the origin of the problem, you may feel a lack of balance in the direction of the car (it pulls to the left or it pulls to the right). Also, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels powerfully, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are dead. In this case, go to your mechanic.
Front axle noise when turning Chevrolet Impala : direction triangles
Finally, you may have a noise in the front wheel on your Chevrolet Impala, when you accelerate, brake or in a rather random but regular way. It is likely that the reason of this problem comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (left triangle pulls to the left) and when braking towards the inside of the same side (left triangle pulls to the right). You can also verify the state of the swivel bellows visually, which may affect the action of changing direction. If you are in one of these cases go to your auto technician.
Loud noise front end Chevrolet Impala : bearings
One of the other probable origins of symptoms of the front axle of your Chevrolet Impala, may be that one of your rollings is tired, it will tend to make a thumping noise that intensifies when it is under stress (turns faster and faster). So don’t forget to verify by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case change it or them as soon as possible. If, on the other hand, this noise only happens with an engaged speed, check out our article on loud noise on Chevrolet Impala, you will certainly find a fix to your problem.
Front end noise squeaking Chevrolet Impala : cardan shaft
One of the most common causes when noise happens on the front axle of your Chevrolet Impala when you turn with your car is linked to the direction of your car. Certainly, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can make “Clac clac” type noises when you approach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Chevrolet Impala, do not hesitate to consult this article to find the solution to your problem.
