In some cases your car can make noises in the front axle, you are very hardly ever reassured by this types of noise and you right away tend to presume that you will lose a wheel or that the fix will cost you an astronomical sum. Then, what if you recognize a noise coming from a gimbals of your Acura RDX? It may not be much and you can correct the issue yourself, but if in doubt it is better to check before a larger failure takes place. It is with this in mind that we have decided to write this content and allow you to find the issue and find a solution. We will, through different steps review all the elements that can make noises at the front end of your Acura RDX. 
What are the elements that can cause a noise close to gimbals on Acura RDX?
Most of our job will focus on finding the element that gives your Acura RDX gimbals noise. The following is a list of the components that are most likely to be generating it and how to validate it.
Noise vibration that sounds like gimbals on Acura RDX : the shock absorber cup
One of the most classic causes of noises on Acura RDX that sounds like a gimbals is advanced wear and tear on your shock system. In fact, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer fulfils its role and during small jolts that compress the suspensions. To check if this is the issue that concerns you, take a dented, slow-speed road and focus on the noise coming from your front end as you pass over holes. If these are the cups, consider replacing them soon as this may affect other parts and require more costly repairs.
Noise while turning that sounds like gimbals Acura RDX : stabilizer bar
If you recognise of a noise on your Acura RDX that sounds like a gimbals when you are turning flat or going up on sidewalks for example, it is most likely linked to one of the parts of your stabilizer bar that is defective. To validate the origin of the issue, you may feel a lack of balance in the direction of the vehicle (it pulls to the left or it pulls to the right). Additionally, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels strongly, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are dead. In this case, go to your mechanic.
Noise when turning Acura RDX : gimbals
One of the most common causes when noise appearsand sounds like gimbals on your Acura RDX when you turn with your vehicle is related to the direction of your vehicle. In fact, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you reach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on your Acura RDX, do not hesitate to consult this article to find the solution to your problem.
