Frequently finding out noises from your vehicle is never relaxing, so finding out wiper sounds on your Acura RDX can be disturbing. This symptom may be an indication of a moderate trouble as well as a warning of a moderate service to come. No matter the reason, it is imperative to check the origin and take the necessary actions to correct the trouble, it is with this in mind that we decided to produce this content to support you see more clearly. We will first check out the conceivable reasons and solutions for dealing with noise from your wipers on your Acura RDX. Then, in a second step, we will give you some hints and tips to prevent this type of noise from occurring again.wiper-blades-noise-acura-rdx

Wiper blades that makes a squeaking or rubbing noise on Acura RDX

A wiper noise on your Acura RDX, whether it is a squeak noise or rather a rubbing noise on your windshield, is not relaxing and can distract your concentration while you are driving. It is essential to stop such a sound. In addition, a wiper blade noise is commonly the signal of a future failure of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.

Explanations and solutions for wiper noise on your Acura RDX

  • Verify the wear of your wiper blades. This is the most common trigger of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Reflect on swapping them in both circumstances.
  • Dirty windshield, verify the level of your windshield washer fluid. One of the causes of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may listen to a wiper noise on your Acura RDX, it is up to you to clean it with your windshield washer fluid if sufficient, otherwise use sodium bicarbonate to clean it, it is very effective.
  • Verify that your wiper blades are well installed. Indeed, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can verify these two points.
  • Verify the tightness of the wiper arm system and that the friction between the windshield and the wipers is not too high. Indeed, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your Acura RDX happens.

Some universal tips to limit wiper blades noise on your Acura RDX

To finish , we will give you some suggestions and warnings to help you extend the life of your wipers and avoid unwanted noise they may create during their lifetime.

  • Never use dishwashing liquid as windshield washer fluid. Indeed, the purpose of the dishwashing liquid is not to wash windows, moreover if you wanted to use it for this goal, you would have to rinse abundantly because it triggers a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore encounter an increase in the noise of these.
  • Do not wax your windshield, the film that the wax will develop may prevent you from seeing the road properly. Indeed, this oily film will generate a veil and prevent you from draining water through your windshield wipers in a normal way.
  • Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
    • Since dirt is the main explanation for the noise created by your windshield wipers, we suggest you not to drive in puddles after storms or heavy rain. Indeed, the puddles will inevitably be full of dirt that will end up on your windshield and trigger noise or deteriorate to your windshield wipers.