Being subject to recurring noise on your car tends to be annoying, a car is so complex that it is usually difficult to locate its origin and even more so to find the part that generates it. If you have already experienced a clicking noise on your Honda HR V, we will most likely be able to support you. In fact, our editorial staff decided to write this content page in order to review the main causes of a clicking noise on Honda HR V. This is why, firstly, we will see what are the reasons of this type of noise coming from your engine block, then those of a noise coming from your direction and finally, the origins of clicking noise on Honda HR V coming from your suspensions.
I hear a clicking noise on Honda HR V located on my engine
Verify your high engine
If you hear a clicking noise on Honda HR V, and this sound is located at the top of the engine, it means that it comes from your cylinder head and its associated parts. Two elements can be the triggers of these ticking noises on Honda HR V. Either the hydraulic pushers , generally it is because of their faulty “hydraulic catch-up” system that we will perceive these clicking noises, often when cold and vanish when hot. Otherwise, it is the interplay of your rocker arms or their condition of wear that is at issue. In this situation, remember to change them.
Verify your low engine
If you have founded the zone of origin of the Honda HR V clikcing noises coming from your low engine, it may be that your rods or piston shafts are the triggers. In both cases, the risk in the long term is the breakage of the motor. These two repairs are very difficult and most mechanics will recommend you to replace the engine of your Honda HR V.
Combustion problem
Finally, if you have the feeling that this clicking noise on Honda HR V is connected to the combustion of your engine, there are three possible triggers of it. Verify the condition of your glow plugs which, if worn, can hinder the proper combustion of the fuel mixture. Then, it is possible that your timing belt is shifted and that it does not properly manage the timing of the various engine components to promote good combustion. And finally, the most classic trigger, comes from your injection, which is either blocked or one or more injectors are damaged. In this case, do not hesitate to read this content page which deals in detail with the different injection sounds on Honda HR V.
I hear a clicking noise on Honda HR V in my direction
Verify the condition of the gimbals
One of the most common triggers of a clicking noises in the direction of your Honda HR V is linked to the direction of the car. Indeed, the cardans and their bellows are parts that are constantly stressed during your changes of direction or that you turn your wheels and a wear of one of them can create a ticking type of sound when you get closer to the stop zone of your steering. A bellows with holes will harm the cardan shaft very quickly and must be replaced in a short time, otherwise the entire cardan shaft will have to be replaced. Consider taking a look at it. If you would like more detailed information about gimbals noises on Honda HR V, do not hesitate to consult this complete guide.
Verify the rest of your direction
Finally, when you find out a clicking noise on your Honda HR V, it is possible that it is the direction that is involved. Just like the gimbals, the steering part is mobilized when you turn your wheels. If this is the case, the parts that may have been damaged due to normal wear and tear or impact (e. g. sidewalks) are steering rods, stabilizer bar silentblocks or steering triangles.
I hear a clicking noise on Honda HR V coming from my suspensions
Verify the suspension
If you encounter a clicking noise on your Honda HR V once you pass a speed bump, it is extremely possible that your suspension block is the induce of the sound. In fact, it may be the suspension cups, which, when they are outdated, have the rubber (silentbloc) that acts as a buffer and shock absorber for the upper part of the suspension that no longer fulfils its function and during small jolts that compress the suspensions. To examine if this is the trouble that concerns you, take a dented road and, at low speed, listen to the sound coming from your front axle when you pass over holes. If these are the cups, consider changing them as soon as possible as this may damage other parts and require more expensive repairs.
Check spring and cylinder
If you hear a clicking noise on your Honda HR V at the suspension level, it is highly possible that spring wear or shock cylinder deformation may be a explanation. To examine the state of the spring, position the car on a flat surface and measure that the heights from the ground to the bottom of the body are equivalent on each side (empty car for measurement). You can also examine between the front and rear, if there is a gap too large it denotes that most likely your springs are worn, if you find out a leak go a little further in the article to have the solution to this problem. For the cylinder the verification is visual, be sure that it seems to work in a straight axis. And that there is no angle that would alter its proper functioning. If one of them breaks in both situations, you should consider changing it or them. If you have the feeling that this noise is more like a squeaking noise on Honda HR V than a clicking noise, don’t hesitate to consult this article.
