Being subject to recurring noise on your vehicle tends to be irritating, a vehicle is so complex that it is usually difficult to determine its origin and even more so to find the part that causes it. If you have already experienced a clicking noise on your Nissan Cube, we will most likely be able to help you. In fact, our editorial staff decided to create this article in order to review the main causes of a clicking noise on Nissan Cube. This is why, firstly, we will check out what are the reasons of this type of noise coming from your engine block, then those of a noise coming from your direction and finally, the sources of clicking noise on Nissan Cube coming from your suspensions.
I listen to a clicking noise on Nissan Cube from my engine
Verify your high engine
If you listen to a clicking noise on Nissan Cube, and this sound is located at the top of the engine, it means that it originates from your cylinder head and its accompanying parts. Two elements can be the causes of these ticking noises on Nissan Cube. Either the hydraulic pushers , in most cases it is because of their faulty “hydraulic catch-up” system that we will perceive these clicking noises, often when cold and disappear when hot. Otherwise, it is the interplay of your rocker arms or their state of wear that is at issue. In this situation, remember to change them.
Verify your low engine
If you have distinguished the region of source of the Nissan Cube clikcing noises coming from your low engine, it may be that your rods or piston shafts are the causes. In both cases, the risk in the long term is the breakage of the motor. These two repairs are very complicated and most mechanics will suggest you to swap the engine of your Nissan Cube.
Combustion problem
Finally, if you have the feeling that this clicking noise on Nissan Cube is connected to the combustion of your engine, there are three possible causes of it. Verify the condition of your glow plugs which, if worn, can hinder the proper combustion of the fuel mixture. Then, it is conceivable that your timing belt is shifted and that it does not properly manage the timing of the various engine elements to promote good combustion. And finally, the most classic trigger, comes from your injection, which is either blocked or one or more injectors are damaged. In this circumstance, do not hesitate to read this article which deals in detail with the different injection sounds on Nissan Cube.
I listen to a clicking noise on Nissan Cube in my direction
Verify the condition of the gimbals
One of the most regular reasons of a clicking noises in the direction of your Nissan Cube is related to the direction of the vehicle. Indeed, the cardans and their bellows are parts that are constantly stressed during your changes of direction or that you turn your wheels and a wear of one of them can generate a ticking type of sound when you approach the stop zone of your steering. A bellows with holes will affect the cardan shaft very quickly and must be swapped in a short time, otherwise the entire cardan shaft will have to be swapped. Consider taking a look at it. If you would like more detailed information about gimbals noises on Nissan Cube, do not hesitate to read this complete guide.
Verify the rest of your direction
Finally, when you find out a clicking noise on your Nissan Cube, it is conceivable that it is the direction that is involved. Just like the gimbals, the steering part is mobilized when you turn your wheels. If this is the circumstance, the parts that may have been damaged due to normal wear and tear or impact (e. g. sidewalks) are steering rods, stabilizer bar silentblocks or steering triangles.
I listen to a clicking noise on Nissan Cube coming from my suspensions
Verify the suspension
If you encounter a clicking noise on your Nissan Cube once you pass a speed bump, it is extremely conceivable that your suspension block is the induce of the sound. In fact, it may be the suspension cups, which, when they are dead, have the rubber (silentbloc) that acts as a buffer and shock absorber for the upper part of the suspension that no longer fulfils its role and during small jolts that compress the suspensions. To examine if this is the problem that concerns you, take a dented road and, at low speed, pay attention to the sound originating from your front axle when you pass over holes. If these are the cups, consider changing them soon as this may damage other parts and require more expensive repairs.
Check spring and cylinder
If you detect a clicking noise on your Nissan Cube at the suspension level, it is highly conceivable that spring wear or shock cylinder deformation may be a reason. To examine the shape of the spring, place the vehicle on a flat surface and measure that the heights from the ground to the bottom of the body are similar on each side (empty car for measurement). You can also examine between the front and rear, if there is a gap too significant it denotes that most likely your springs are worn, if you observe a leak go a little further in the article to have the solution to this problem. For the cylinder the verification is visual, make sure that it seems to work in a straight axis. And that there is no angle that would alter its proper functioning. If one of them breaks in both situations, you should consider changing it or them. If you have the feeling that this noise is more like a squeaking noise on Nissan Cube than a clicking noise, don’t hesitate to consult this article.
