Being subject to regular noise on your car tends to be annoying, a car is so elaborate that it is usually difficult to locate its origin and even more so to find the part that causes it. If you have already experienced a clicking noise on your Toyota Highlander, we will almost certainly be able to support you. In fact, our editorial staff decided to compose this article in order to review the main causes of a clicking noise on Toyota Highlander. This is why, firstly, we will check out what are the origins of this type of noise coming from your engine block, then those of a noise coming from your direction and finally, the sources of clicking noise on Toyota Highlander coming from your suspensions.clicking-noise-toyota-highlander

I discover a clicking noise on Toyota Highlander from my engine

Verify your high engine

If you discover a clicking noise on Toyota Highlander, and this sound is located at the top of the engine, it means that it originates from your cylinder head and its accompanying parts. Two parts can be the causes of these ticking noises on Toyota Highlander. Either the hydraulic pushers , generally it is because of their faulty “hydraulic catch-up” system that we will perceive these clicking noises, often when cold and disappear when hot. Otherwise, it is the interplay of your rocker arms or their state of wear that is at issue. In this circumstance, remember to change them.

Verify your low engine

If you have founded the zone of source of the Toyota Highlander clikcing noises coming from your low engine, it may be that your rods or piston shafts are the causes. In both cases, the risk in the long term is the breakage of the motor. These two repairs are very difficult and most mechanics will suggest you to change the engine of your Toyota Highlander.

Combustion problem

Finally, if you have the feeling that this clicking noise on Toyota Highlander is related to the combustion of your engine, there are three possible reasons of it. Verify the condition of your glow plugs which, if worn, can hinder the proper combustion of the fuel mixture. Then, it is possible that your timing belt is shifted and that it does not properly manage the timing of the various engine components to promote good combustion. And finally, the most classic cause, comes from your injection, which is either blocked or one or more injectors are injured. In this case, do not hesitate to consult this article which deals in detail with the different injection sounds on Toyota Highlander.

I discover a clicking noise on Toyota Highlander in my direction

Verify the condition of the gimbals

One of the most basic triggers of a clicking noises in the direction of your Toyota Highlander is linked to the direction of the car. Indeed, the cardans and their bellows are parts that are constantly stressed during your changes of direction or that you turn your wheels and a wear of one of them can create a ticking type of sound when you approach the stop zone of your steering. A bellows with holes will harm the cardan shaft very quickly and must be swapped in a short time, otherwise the entire cardan shaft will have to be swapped. Consider taking a look at it. If you would like more detailed information about gimbals noises on Toyota Highlander, do not hesitate to consult this complete guide.

Verify the rest of your direction

Finally, when you know a clicking noise on your Toyota Highlander, it is possible that it is the direction that is involved. Just like the gimbals, the steering part is mobilized when you turn your wheels. If this is the case, the parts that may have been damaged due to normal wear and tear or impact (e. g. sidewalks) are steering rods, stabilizer bar silentblocks or steering triangles.

I discover a clicking noise on Toyota Highlander coming from my suspensions

Verify the suspension

If you encounter a clicking noise on your Toyota Highlander once you pass a speed bump, it is very possible that your suspension block is the cause of the sound. In fact, it may be the suspension cups, which, when they are out of date, have the rubber (silentbloc) that acts as a buffer and shock absorber for the upper part of the suspension that no longer fulfils its function and during small jolts that compress the suspensions. To verify if this is the issue that concerns you, take a dented road and, at low speed, pay attention to the sound originating from your front axle when you pass over holes. If these are the cups, consider changing them soon as this may damage other parts and require more expensive repairs.

Check spring and cylinder

If you hear a clicking noise on your Toyota Highlander at the suspension level, it is highly possible that spring wear or shock cylinder deformation may be a cause. To verify the shape of the spring, position the car on a flat surface and measure that the heights from the ground to the bottom of the body are identical on each side (empty car for measurement). You can also verify between the front and rear, if there is a gap too significant it suggests that that most likely your springs are worn, if you observe a leak go a little further in the article to have the answer to this problem. For the cylinder the verification is visual, be sure that it seems to work in a straight axis. And that there is no angle that would alter its proper functioning. If one of them breaks in both situations, you should consider changing it or them. If you have the feeling that this noise is more like a squeaking noise on Toyota Highlander than a clicking noise, don’t hesitate to consult this article.