You hear a starter motor noise on your Peugeot 108 each time you start your vehicle. We can understand that this is not agreeable and that you have questions. Finding out such a sound is not always a good sign, but it may also be nothing severe. To help you fix this trouble, our team has decided to create this article content to assist you in this research. First, we will describe how the starter motor functions on your Peugeot 108, and then what starter motor noises you can discover on your Peugeot 108.
Functioning and various information
Function of a starter motor on Peugeot 108
The starter motor is an electric motor whose sole function is to start the engine motor of your automobile. By a magnetic system and a “serial” technology, it will launch an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Peugeot 108 is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Peugeot 108
- Do not run your starter too long
- Do not use a starter motor on Peugeot 108 with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the temperature is too cold. You should not try to start for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is empty, you always want to start your automobile, the energy it is capable of holding may not be sufficient to provide the power expected by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not resolve the reason of your failure to start repeatedly, your starter may be the future part you will have to swap.
I hear noises from the starter motor of my Peugeot 108, what are the causes?
I encounter a loud noise from the starter of my Peugeot 108
If you notice a starter motor noise on Peugeot 108 and you have the feeling that it is close to a loud noise, it is plausible that it is the starter motor gears that are at the origin of it. Indeed, often when the component has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be appropriate, in which case the gears will be worn down after some time and will not slip and will no longer properly engage the engine when starting. Verify the condition of the drive pinion, if it is the element responsible of the starter motor noise on your Peugeot 108 change it.
If it is a noise in the front of your automobile but it seems to you after examining not to come from your starter, read this article content about front end noise on Peugeot 108 which may give you other leads to fix your noise trouble.
I hear a clicking noise of the key running in my neiman but no noise at the starter motor of my Peugeot 108
If you hear a clicking noise at the starter motor of your Peugeot 108, there are two possible failures connected to this sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most classic ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You might have a trouble with unplugged cable check your electrical installation. If after checking this clicking noise on Peugeot 108 doesn’t come from your starter motor, check this article for more informations.
