You hear a starter motor noise on your Nissan Pulsar when you start your vehicle. We agree that this is not enjoyable and that you have questions. Discovering such a noise is not always a good sign, but it may also be nothing serious. To assist you solve this trouble, our team has chosen to compose this content to assist you in this research. First, we will detail how the starter motor functions on your Nissan Pulsar, and then what starter motor noises you can discover on your Nissan Pulsar.
Functioning and various information
Function of a starter motor on Nissan Pulsar
The starter motor is an electric motor whose only job is to start the engine motor of your vehicle. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Nissan Pulsar is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Nissan Pulsar
- Do not try to start your engine for too long
- Do not use a starter motor on Nissan Pulsar with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the weather is too cold. You should not try to start for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is empty, you always want to start your vehicle, the energy it is capable of holding may not be sufficient to generate the power demanded by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not solve the cause of your failure to start repeatedly, your starter may be the future element you will have to change.
I hear noises from the starter motor of my Nissan Pulsar, what are the causes?
I experience a loud noise from the starter of my Nissan Pulsar
If you perceive a starter motor noise on Nissan Pulsar and you have the feeling that it is close to a loud noise, it is conceivable that it is the starter motor gears that are at the source of it. Indeed, often when the component has been dismantled for other maintenance, its adjustment in relation to the engine flywheel may no longer be perfect, in which situation the gears will be worn down after some time and will not slip and will no longer properly activate the engine when starting. Examine the state of the drive pinion, if it is the component resposible of the starter motor noise on your Nissan Pulsar replace it.
If it is a noise in the front of your vehicle but it seems to you after examining not to come from your starter, consult this content about front end noise on Nissan Pulsar which may give you other leads to solve your noise trouble.
I hear a clicking noise of the key running in my neiman but no noise at the starter motor of my Nissan Pulsar
If you hear a clicking noise at the starter motor of your Nissan Pulsar, there are two possible failures linked to this warning sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most typical ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You might have a trouble with unplugged cable examine your electrical installation. If after looking at this clicking noise on Nissan Pulsar doesn’t come from your starter motor, check this article for more informations.
