You acknowledge a starter motor noise on your hyundai i10 every time you start your vehicle. We agree that this is not enjoyable and that you have inquiries. Listening such a sound is not always a good sign, but it may also be nothing major. To assist you remedy this trouble, our team has decided to compose this content page to support you in this research. First, we will detail how the starter motor functions on your hyundai i10, and then what starter motor noises you can notice on your hyundai i10.
Functioning and various information
Function of a starter motor on hyundai i10
The starter motor is an electric motor whose only function is to start the engine of your automobile. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your hyundai i10 is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on hyundai i10
- Do not try to start your engine for too long
- Do not use a starter motor on hyundai i10 with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the weather is too cold. You should not try to start for more than a few seconds or you will burn it.
Although when you have a battery that is exhausted, you always want to start your automobile, the energy it is capable of holding may not be sufficient to furnish the power needed by the starter motor to start your engine. Repeated attempts will pre-use your starter motor and if you do not deal with the trigger of your failure to start repeatedly, your starter may be the future part you will have to swap.
I acknowledge noises from the starter motor of my hyundai i10, what are the causes?
I encounter a loud noise from the starter of my hyundai i10
If you notice a starter motor noise on hyundai i10 and you have the feeling that it is close to a loud noise, it is possible that it is the starter motor gears that are at the source of it. In fact, often when the component has been dismantled for other maintenance, its adjustment in relation to the engine flywheel may no longer be ideal, in which circumstance the gears will be worn down over time and will not slip and will no longer properly engage the engine when starting. Examine the condition of the drive pinion, if it is the part responsible of the starter motor noise on your hyundai i10 replace it.
If it is a noise in the front of your automobile but it seems to you after reviewing not to come from your starter, read this content page about front end noise on hyundai i10 which may provide you other leads to remedy your noise trouble.
I acknowledge a clicking noise of the key running in my neiman but no noise at the starter motor of my hyundai i10
If you acknowledge a clicking noise at the starter motor of your hyundai i10, there are two possible failures connected to this sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most traditional ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You may have a trouble with unplugged cable verify your electrical installation. If after checking out this clicking noise on hyundai i10 doesn’t come from your starter motor, check this article for more informations.
