It is never enjoyable to listen to a sound on your vehicle that you don’t know where it comes from. You may be questioning what to do when you find a reversing gear noise that continues on your hyundai i10? Any gearbox trouble can be critical, but before making sure, it is better to do a few checks. Our team has created this paper to help you fix it. First, we will see what the origins and the different gearbox noises can be on hyundai i10, and second, what are the solutions available to you.
Classical reverse hyundai i10 noises and some tips to maintain your gearbox
Why does the reversing of my hyundai i10 make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult exercise. The noise induced by the reversing of your hyundai i10 is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears more quiet than with spur gears used for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Indeed, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad choice. In fact, the pressure you will exert on the gears will be significant and you will make a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely typical if you experience a reverse noise on your hyundai i10 if you shift gear under these conditions.
Diverse hyundai i10 reversing noises and their origins
Finally in this section, we will move on to what you are probably most interested in this content, to find out about the origin of reversing noise on hyundai i10. Here are the 3 typical noises you may be victim of.
I perceive a grinding noise when starting in reverse gear
If you listen to a grinding noise when you start in reverse with your hyundai i10, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to check out this article for more info about strut mount noises on hyundai i10.
An increased reverse knocking noise on hyundai i10X
If you are subject to a knocking noise when you are in reverse with your hyundai i10 and this noise tends to increase as you gain speed. It is conceivable that you are dealing with a serious trouble that needs to be fixed quickly before ruining your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears quickly. Take your vehicle to your repair shop quickly or browse this article about gearbox noise on hyundai i10 for more data.
I hear a noise when I go in reverse
Finding out a noise when you shift into reverse is normal and related to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your hyundai i10 reverse gear makes more noise than before, it is conceivable that filings have been made and are moving around in it. It is therefore time to empty the box.
