You notice a starter motor noise on your Ford Tourneo each time you start your vehicle. We can understand that this is not agreeable and that you have inquiries. Finding out such a sound is not always a good signal, but it may also be nothing severe. To help you remedy this trouble, our team has chosen to write this article content to help you in this research. First, we will detail how the starter motor works on your Ford Tourneo, and then what starter motor noises you can know on your Ford Tourneo.
Functioning and various information
Function of a starter motor on Ford Tourneo
The starter motor is an electric motor whose single job is to start the engine unit of your automobile. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Ford Tourneo is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Ford Tourneo
- Do not try to start your engine for too long
- Do not use a starter motor on Ford Tourneo with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the temperature is too cold. You should not try to start for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is exhausted, you always want to start your automobile, the energy it is capable of holding may not be good enough to furnish the power needed by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not treat the trigger of your failure to start repeatedly, your starter may be the future element you will have to change.
I notice noises from the starter motor of my Ford Tourneo, what are the reasons?
I feel a loud noise from the starter of my Ford Tourneo
If you perceive a starter motor noise on Ford Tourneo and you have the feeling that it is approaching a loud noise, it is possible that it is the starter motor gears that are at the source of it. In fact, often when the part has been dismantled for other maintenance, its adjustment in relation to the engine flywheel may no longer be appropriate, in which case the gears will be worn down as time passes and will not slip and will no longer properly engage the engine when starting. Check the condition of the drive pinion, if it is the element responsible of the starter motor noise on your Ford Tourneo change it.
If it is a noise in the front of your automobile but it seems to you after reviewing not to come from your starter, consult this article content about front end noise on Ford Tourneo which may offer you other leads to fix your noise trouble.
I notice a clicking noise of the key running in my neiman but no noise at the starter motor of my Ford Tourneo
If you notice a clicking noise at the starter motor of your Ford Tourneo, there are two possible failures linked to this indicator. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most traditional ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You might have a trouble with unplugged cable check your electrical installation. If after examining this clicking noise on Ford Tourneo doesn’t come from your starter motor, check this article for more informations.
