You hear a starter motor noise on your Citroen Jumper 2 once you start your automobile. We agree that this is not enjoyable and that you have inquiries. Listening such a sound is not always a good signal, but it may also be nothing major. To help you remedy this trouble, our team has chosen to compose this article to help you in this research. First, we will explain how the starter motor functions on your Citroen Jumper 2, and then what starter motor noises you can experience on your Citroen Jumper 2.
Functioning and various information
Function of a starter motor on Citroen Jumper 2
The starter motor is an electric motor whose single function is to start the engine of your vehicle. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Citroen Jumper 2 is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Citroen Jumper 2
- Do not run your starter too long
- Do not use a starter motor on Citroen Jumper 2 with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the climate is too cold. You should not turn your key for more than a few seconds or you will burn it.
Although when you have a battery that is exhausted, you always want to start your vehicle, the energy it is capable of holding may not be enough to provide the power needed by the starter motor to start your engine. Repeated attempts will pre-use your starter motor and if you do not treat the reason of your failure to start repeatedly, your starter may be the future element you will have to swap.
I hear noises from the starter motor of my Citroen Jumper 2, what are the triggers?
I feel a loud noise from the starter of my Citroen Jumper 2
If you acknowledge a starter motor noise on Citroen Jumper 2 and you have the feeling that it is approaching a loud noise, it is plausible that it is the starter motor gears that are at the source of it. Indeed, often when the part has been dismantled for other fixes, its adjustment in relation to the engine flywheel may no longer be optimal, in which case the gears will be worn down after some time and will not slip and will no longer properly engage the engine when starting. Verify the condition of the drive pinion, if it is the element responsible of the starter motor noise on your Citroen Jumper 2 swap it.
If it is a noise in the front of your vehicle but it seems to you after checking not to come from your starter, read this article about front end noise on Citroen Jumper 2 which may give you other leads to solve your noise trouble.
I hear a clicking noise of the key running in my neiman but no noise at the starter motor of my Citroen Jumper 2
If you hear a clicking noise at the starter motor of your Citroen Jumper 2, there are two possible failures associated with this sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most traditional ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You may have a trouble with unplugged cable check your electrical installation. If after checking out this clicking noise on Citroen Jumper 2 doesn’t come from your starter motor, check this article for more informations.
