It is never relaxing to discover new noises on your vehicle. We usually will be anxious and think about the worst. But hearing wheel noise on Hyundai Ix35 is very often relating to small trouble that you can easily resolve. To assist you in this investigation, our team decided to create this content page to make your life easier and support you in this process. To do this, we will alternately see what are the different noises that Hyundai Ix35 wheels can cause and to which malfunctions they are linked.
The different wheel noises on Hyundai Ix35 and their sources
We will therefore concentrate on the different types of sound you may encounter and their triggers.
I notice grinding wheel noise on Hyundai Ix35 from, cardan shaft
The first situation of grinding wheel noise on your Hyundai Ix35 is that you feel a gimbal sound when you are turning significantly, usually at low speed. It is also possible that you may encounter this sound when you drive over speed bumps. You should hear a noise close to a cracking . It is quite possible in this case that one or more bellows of your gimbals are dead. In this situation, the joint must be weakened and the transmission may fail. Check the condition of the joint bellows and change them if necessary or risk having your vehicle immobilized. If they have cracks, they will fairly quickly dry out and fill with dust or stones that will promptly harm the cardan shaft itself, don’t wait to act! In case you have a sound when you pass on damaged roads but the gimbals are not the origin of it, have a look at this article about suspension noise on Hyundai Ix35 to support you find a solution.
I acknowledge a wheel noise Hyundai Ix35 when coasting linked to a bearing
One of the other probable causes of symptoms on the front wheel of your Hyundai Ix35 when coasting, may be that one of your bearing is nearly dead, it will tend to generate a thumping sound that intensifies when it is stressed (turns faster and faster). So don’t forget to verify by taking speed (neutral and window open to hear only the noise of the wheels) that the sound is well coming from here, if this is the case change it or them in short order. If, on the other hand, this noise only shows up itself with an engaged speed, have a look at this article about loud noises on Hyundai Ix35, you will most likely find a resolution to your problem.
I listen to a wheel noise Hyundai Ix35 linked to brakes
If you listen to noise from one or both of your wheels, it is highly possible that it is your pads or discs that are the cause. Indeed, a disc or a set of dead plates will create a loud metallic sound that you will inevitably notice. To verify this, put your vehicle on axle stands, and control the condition of your discs and pads by getting rid of the wheel. If they are involved, change them fairly quickly , otherwise you will no longer be able to brake. If you encounter a metallic noise from your Hyundai Ix35, but the brakes are not the cause, browse this article for more details on this problem.
I experience a wheel noise Hyundai Ix35 linked to faulty wheel alingment
If you encounter a sound that may look like a vibration and will increase as you increase speed, it is possible that your wheel alingment or balancing is the reason of it. Wheel alingment of a vehicle is an important step that is generally done after each tire swap. It will ensure that the wheel moves in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and cause a significant wheel noise on Hyundai Ix35. Examine that your seals are still in position, otherwise go to your mechanic.
I experience a wheel noise Hyundai Ix35 due to wishbone
Finally, you may experience a noise on your Hyundai Ix35 at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the cause of this problem comes from the double wishbone suspension or the direction hinges. Indeed, you will be able to test a damaged double suspension wishbone during the acceleration phases when it will be pushed on side and the car will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also verify the condition of the swivel bellows visually, which may affect the action of changing direction. If you are in one of these cases go to your auto mechanic.
