It is never enjoyable to find out new sounds on your automobile. We generally tend to be anxious and think about the worst. But hearing wheel noise on Audi Tt is very often related to small problems that you can easily solve. To support you in this inspection, our team decided to produce this content page to make your life easier and help you in this challenge. To do this, we will alternately see what are the different noises that Audi Tt wheels can provoke and to which failures they are associated.
The different wheel noises on Audi Tt and their origins
We will therefore look into the different types of noise you may feel and their causes.
I acknowledge grinding wheel noise on Audi Tt from, cardan shaft
The first possibility of grinding wheel noise on your Audi Tt is that you feel a gimbal noise when you are turning significantly, usually at low speed. It is also plausible that you may feel this noise when you pass over speed bumps. You should listen to a noise close to a cracking . It is quite plausible in this circumstance that one or more bellows of your gimbals are dead. In this case, the joint must be damaged and the transmission may fail. Check the condition of the joint bellows and replace them if needed or risk having your automobile immobilized. If they have cracks, they will fairly quickly dry out and fill with dust or stones that will very fast harm the cardan shaft itself, don’t wait to act! In case you have a noise when you pass on damaged roads but the gimbals are not the reason of it, read this guide about suspension noise on Audi Tt to help you find a solution.
I acknowledge a wheel noise Audi Tt when coasting due to a bearing
One of the other potential origins of symptoms on the front wheel of your Audi Tt when coasting, may be that one of your bearing is good to be replaced, it will tend to make a thumping noise that intensifies when it is stressed (turns faster and faster). So remember to check by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case replace it or them before long. If, on the other hand, this noise only shows up itself with an engaged speed, read this guide about loud noises on Audi Tt, you will most likely find an answer to your problem.
I perceive a wheel noise Audi Tt due to brakes
If you perceive noise from one or both of your wheels, it is highly plausible that it is your pads or discs that are the reason. In fact, a disc or a set of dead plates will create a loud metallic noise that you will obviously feel. To check this, put your automobile on axle stands, and control the condition of your discs and pads by taking off the wheel. If they are involved, replace them quickly , otherwise you will no longer be able to brake. If you feel a metallic noise from your Audi Tt, but the brakes are not the cause, read this guide for more information on this problem.
I experience a wheel noise Audi Tt due to faulty wheel alingment
If you feel a noise that may look like a vibration and will intensify as you increase speed, it is plausible that your wheel alingment or balancing is the cause of it. Wheel alingment of a automobile is an important step that is generally done after each tire change. It will ensure that the wheel rotates in a perfect axis and therefore that tyre wear is homogeneous and grip, ground contact is ideal. If your balancing weights are missing or incorrectly positioned, your wheels will tend to vibrate a lot and provoke a significant wheel noise on Audi Tt. Verify that your seals are still set up, otherwise go to your garage.
I hear a wheel noise Audi Tt linked to wishbone
Finally, you may experience a noise on your Audi Tt at the wheels, when you accelerate, you brake or in a rather random moment. It is likely that the cause of this problem comes from the double wishbone suspension or the direction hinges. In fact, you will be able to test a damaged double suspension wishbone during the acceleration phases when it will be pushed on side and the automobile will pull on the outside of the damaged wishbone (right wishbone pulls right) and when braking towards the inside of the same side (left wishbone pulls left). You can also check the state of the swivel bellows visually, which may disturb the action of changing direction. If you are in one of these cases go to your auto mechanic.