Finding out noises from your vehicle is never pleasant. Especially repeated noises such as rubbing noises on Mazda 2 that will disturb you and prevent you from traveling in the normal quiet environment that your vehicle provides you. If you are the subject of rubbing noise on Mazda 2, you are in the right place, our team has decided to create this article content to support you find the source and stop it. This is why, first of all, we will focus on the rubbing noises that can arise when you drive with your Mazda 2, and secondly, the rubbing noises that come from your engine block.
I listen a rubbing noise on Mazda 2 when I drive
Noise of rubbing from wheels
First, we will look into rubbing noises that can be caused by wheel, be aware that in this article we will only explore the most common triggers of rubbing noises on Mazda 2 in connection with your wheels, if you want a complete report on wheel noise on Mazda 2, it’s here.
- Rubbing noise caused by your bearing
- Brake noise
One of the other possible triggers of rubbing noise symptoms on your Mazda 2, may be that one of your bearing is tired, it will frequently produce a loud noise that goes up when stressed (turns faster and faster). So remember to check by taking speed (neutral gear and window open to pay attention only to noise of the wheels) that the noise is well located here, if this is the case replace it or them fairly quickly. If, on the other hand, this noise only manifests itself with an engaged speed, read this guide on Ancre_loud_noise, you will most likely find a remedy to your issue.
If you hear a rubbing noise on Mazda 2 and you have the feeling that it comes from your wheels, it is highly conceivable that it is your pads or discs that are the reason. Indeed, a disc or a set of dead plates will generate a strong metallic friction noise that you will inevitably feel. To check this, put your vehicle on safety stand, and check the state of your discs and pads by taking away the wheel. If they are involved, replace them promptly , otherwise you will no longer be able to brake. If you encounter a metallic noise from your vehicle, and you want explications about it, browse this guide for more details about brake noises on Mazda 2.
Noise of rubbing from under the vehicle
Finally, a rubbing noise on your Mazda 2 from the lower part of the chassis may be linked to a poor attachment of your exhaust to your vehicle. Indeed, over time, vibrations, the pot fasteners on the vehicle chassis can come off. In this instance, you must check, when cold, that the exhaust holds well, to do this try to make it move in different angles and observe how it reacts. Backwards there should be some play and be able to move but not too much. The closer you get to the engine, the more fixed it should be. Visually check the fasteners for which you have doubts. Finally, it is prospective that a rubber mounts may have died . In such a case it will have to be changed. If your exhaust is the reason of this exhaust noise on Mazda 2, but the silent blocks are not the reason, read this guide to find the reason.
I listen a rubbing noise on Mazda 2 coming from the engine
If it is close to an engine noise rubbing on Mazda 2, you may have one of the bearings of your engine accessory parts that is damaged or, one of your belts are displaced or worn and trigger this friction.So verify the state and try to find the exact location of this noise by positioning someone at the engine at idle, and if this noise is more likely to show up in rpm, accelerate and position someone at the engine block to identify the area of source of the noise. The three parts whose bearings are often at the origin of these noises are the water pump, the injection pump and the oil pump . Also keep in mind to check the state of your belts, and replace them if required because it is the health of your vehicle that is at stake. If you encounter belt noises on Mazda 2, we recommend highly that you read this article content for more information on this subject.
