It is never pleasing to notice a sound on your vehicle that you don’t know where it comes from. You may be questioning what to do when you identify a reversing gear noise that remains on your Suzuki Jimny? Any gearbox trouble can be serious, but before making sure, it is better to do a few investigations. Our team has made this paper to support you resolve it. First, we will see what the sources and the different gearbox noises can be on Suzuki Jimny, and second, what are the solutions available to you.
Classical reverse Suzuki Jimny noises and some tips to look after your gearbox
Why does the reversing of my Suzuki Jimny make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult exercise. The noise caused by the reversing of your Suzuki Jimny is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears implemented for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad plan. In fact, the pressure you will exert on the gears will be significant and you will generate a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely common if you find out a reverse noise on your Suzuki Jimny if you shift gear under these conditions.
Diverse Suzuki Jimny reversing noises and their causes
Finally in this section, we will move on to what you are probably most excited about in this document, to learn about the origin of reversing noise on Suzuki Jimny. Here are the 3 typical sounds you may be victim of.
I hear a grinding noise when starting in reverse gear
If you notice a grinding noise when you start in reverse with your Suzuki Jimny, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this situation, do not hesitate to check out this paper for more details about strut mount noises on Suzuki Jimny.
An increased reverse knocking noise on Suzuki JimnyX
If you are subject to a knocking noise when you are in reverse with your Suzuki Jimny and this noise tends to amplify as you gain speed. It is conceivable that you are confronting a serious trouble that needs to be fixed as soon as possible before ruining your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears before long. Take your vehicle to your mechanic quickly or browse this document about gearbox noise on Suzuki Jimny for more information.
I listen to a noise when I go in reverse
Experiencing a noise when you shift into reverse is normal and connected to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Suzuki Jimny reverse gear makes more noise than before, it is conceivable that filings have been produced and are moving around in it. It is therefore time to empty the box.
