It is never enjoyable to perceive a sound on your vehicle that you don’t know where it comes from. You may be thinking what to do when you identify a reversing gear noise that lasts on your Peugeot Partner? Any gearbox trouble can be critical, but before making sure, it is better to do a few inspections. Our team has created this document to support you fix it. First, we will see what the origins and the different gearbox noises can be on Peugeot Partner, and second, what are the solutions available to you.
Classical reverse Peugeot Partner noises and some tips to look after your gearbox
Why does the reversing of my Peugeot Partner make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult task. The sound generated by the reversing of your Peugeot Partner is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears employed for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad practice. In fact, the pressure you will put in on the gears will be monumental and you will develop a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely typical if you listen to a reverse noise on your Peugeot Partner if you shift gear under these conditions.
Several Peugeot Partner reversing noises and their origins
Finally in this section, we will move on to what you are probably most enthusiastic about in this content, to learn about the cause of reversing noise on Peugeot Partner. Here are the 3 typical noises you may be victim of.
I hear a grinding noise when starting in reverse gear
If you perceive a grinding noise when you start in reverse with your Peugeot Partner, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this situation, do not hesitate to browse this document for more information about strut mount noises on Peugeot Partner.
An increased reverse knocking noise on Peugeot PartnerX
If you are subject to a knocking noise when you are in reverse with your Peugeot Partner and this noise tends to build up as you gain speed. It is conceivable that you are going through a serious trouble that needs to be fixed right away before wrecking your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears in short order. Take your vehicle to your mechanic quickly or browse this content page about gearbox noise on Peugeot Partner for more details.
I notice a noise when I go in reverse
Listening a noise when you shift into reverse is normal and related to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Peugeot Partner reverse gear makes more noise than before, it is conceivable that filings have been produced and are moving around in it. It is therefore time to empty the box.
