It is never pleasing to discover a sound on your vehicle that you don’t know where it comes from. You may be wondering what to do when you notice a reversing gear noise that lasts on your volvo v40? Any gearbox problem can be serious, but before making sure, it is better to do a few checks. Our team has written this content page to support you resolve it. First, we will see what the origins and the different gearbox noises can be on volvo v40, and second, what are the solutions available to you.reverse-gear-noise-volvo-v40

Classical reverse volvo v40 noises and some tips to maintain your gearbox

Why does the reversing of my volvo v40 make a different noise from my other speeds?

De facto, integrating all gears, bearings and pinions into a gearbox is a difficult exercise. The sound generated by the reversing of your volvo v40 is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears more quiet than with spur gears chosen for the reverse gear.

Tips to limit wear on your clutch and gearbox

  • Don’t give a big boost:
    Certainly, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions.

  • Never reverse while the vehicle is in motion or vice versa:
    Reversing the direction of operation of the gearbox during operation is a very bad choice. Indeed, the pressure you will apply on the gears will be significant and you will develop a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely normal if you notice a reverse noise on your volvo v40 if you shift gear under these conditions.

Different volvo v40 reversing noises and their origins

Finally in this section, we will move on to what you are probably most excited about in this page, to learn about the cause of reversing noise on volvo v40. Here are the 3 typical sounds you may be victim of.

I hear a grinding noise when starting in reverse gear

If you discover a grinding noise when you start in reverse with your volvo v40, it may be the engine mounts that are tired. Certainly, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to read this content page for more information about strut mount noises on volvo v40.

An increased reverse knocking noise on volvo v40X

If you are subject to a knocking noise when you are in reverse with your volvo v40 and this noise tends to amplify as you gain speed. It is conceivable that you are going through a serious problem that needs to be fixed very fast before destroying your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears in short order. Take your vehicle to your mechanic quickly or browse this document about gearbox noise on volvo v40 for more information.

I hear a noise when I go in reverse

Listening a noise when you shift into reverse is normal and linked to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your volvo v40 reverse gear makes more noise than before, it is conceivable that filings have been made and are moving around in it. It is therefore time to empty the box.