It is never pleasant to discover a sound on your automobile that you don’t know where it comes from. You may be thinking what to do when you find a reversing gear noise that persists on your Audi Rs6? Any gearbox trouble can be critical, but before making sure, it is better to do a few inspections. Our team has created this paper to help you solve it. First, we will see what the origins and the different gearbox noises can be on Audi Rs6, and second, what are the solutions available to you.
Classical reverse Audi Rs6 noises and some tips to preserve your gearbox
Why does the reversing of my Audi Rs6 make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult process. The sound induced by the reversing of your Audi Rs6 is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears more quiet than with spur gears employed for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad choice. Indeed, the pressure you will exert on the gears will be significant and you will generate a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely common if you hear a reverse noise on your Audi Rs6 if you shift gear under these conditions.
Different Audi Rs6 reversing noises and their triggers
Finally in this section, we will move on to what you are probably most enthusiastic about in this article, to learn about the cause of reversing noise on Audi Rs6. Here are the 3 typical noises you may be victim of.
I experience a grinding noise when starting in reverse gear
If you discover a grinding noise when you start in reverse with your Audi Rs6, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to browse this content for more info about strut mount noises on Audi Rs6.
An increased reverse knocking noise on Audi Rs6X
If you are subject to a knocking noise when you are in reverse with your Audi Rs6 and this noise tends to increase as you gain speed. It is possible that you are dealing with a serious trouble that needs to be solved right away before wrecking your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears before long. Take your automobile to your repair shop quickly or check out this article about gearbox noise on Audi Rs6 for more information.
I perceive a noise when I go in reverse
Hearing a noise when you shift into reverse is normal and linked to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Audi Rs6 reverse gear makes more noise than before, it is possible that filings have been made and are moving around in it. It is therefore time to empty the box.
