Hearing an unknown noise from your vehicle does not tend to reassure, and although it might be harmless, it is also conceivable that it is a symptom of a serious breakdown on approach. Discerning a noise coming from the rear end of your hyundai i40 may signal a stopover at your mechanic in the near future, like just a rock in the tread of a wheel. To help you locate the triggers, our team has written this document which might help you to see more clearly. First, we will check out what the different noises and concerns associated with your hyundai i40 rear end noise are, and second, what your solutions are if the issue is not included in this list.
Parts that can cause noise in the rear end of my hyundai i40
Rear end loud noise hyundai i40
If you detect a loud noise on the rear end of your hyundai i40, it may be relating to your wheels. In fact, the wheels can be at the source of this vibration. Two options are then possible, first of all, wheel balancing may be defective (loss of lead weight which fulfils this task), which leads to an imbalance in the wheel’s logical path and therefore its vibration. To check this, examine look at the presence of your balancing seals on your rims. Finally, it is also conceivable that a deformed or pre-used tyre may have the same types of symptoms and triggers this rear end lound noise on your hyundai i40. The deformation of a tyre, following an impact for example, will cause it to stick poorly to the ground and therefore noise will emerge. In any case, please remember to verify the tread and sidewall of your tires. Another possibility is that your exhaust pipehas a hole in it or a collar has become loose. Please remember to go under your hyundai i40 while the engine is running and verify the sound of your exhaust pipe to discern possible exhaust gas leaks. If you experience of a loud noise but the cause is not present here, we recommend highly that you go through this content page about loud noise on hyundai i40, which may give you more ideas.
Rear end noise slamming hyundai i40 originating from your suspension
If you identify a clicking noise on the rear axle of your hyundai i40, it is conceivable that the suspension portion of your vehicle may be affected. In fact, when the steering unit of your vehicle is activated, the damping unit of your vehicle may be the cause of the issue. In fact, it is not abnormal for the shock absorber cup to be out of order or for the shock absorber bearings to be out of order. Please remember to verify the state of these two units. For more details, see our article on suspension noise on hyundai i40.
Squeaky noise rear end hyundai i40 based on your bearings
A squeaking noise in the rear end of your hyundai i40 can also result of precipitate wear of your bearings. In fact, bearings have an essential task in the proper handling of the vehicle while driving. When you turn strongly, at high or low speed and bring the direction to a stop, the pressure applied on the bearings is higher than if you turn slowly, it can create sounds close to a creaking sound if they are worn. Please remember to verify their state. If you want more information about bearing noise on hyundai i40, it’s here.
What if I still haven’t fixed the rear end noise of my hyundai i40
If you still haven’t found a remedy despite the different alternatives described here and the noise from the rear end of your hyundai i40 continues, it is conceivable that the issue is relating to other mechanical units and that this failure is less common. Feel free to browse this content page on suspension noise on hyundai i40 which will eventually give you other ideas to help you solve your issue. Do not leave this issue lying around in any case and take your car to your auto technician to preserve your vehicle and your safety.
