Hearing a strange noise from your automobile does not tend to reassure, and although it could be not a big deal, it is also conceivable that it is an indicator of an important failure on approach. Acknowledging a noise right from the rear end of your Fiat Panda may indicate a trip to your garage in the near future, like just a rock in the tread of a car tire. To support you determine the triggers, our team has made this article which should support you to see more clearly. First, we will check out what the different noises and problems associated with your Fiat Panda rear end noise are, and second, what your solutions are if the trouble is not included in this list.
Parts that can generate noise in the rear end of my Fiat Panda
Rear end loud noise Fiat Panda
If you find a loud noise on the rear end of your Fiat Panda, it may be connected to your wheels. In fact, the wheels can be at the source of this vibration. Two possibilities are then possible, first of all, wheel balancing may be faulty (loss of lead weight which fulfils this task), which leads to an imbalance in the wheel’s logical path and therefore its vibration. To check this, examine look at the presence of your balancing seals on your rims. Finally, it is also conceivable that a deformed or pre-used tyre may have the same types of symptoms and causes this rear end lound noise on your Fiat Panda. The deformation of a tyre, following an impact for example, will cause it to stick poorly to the ground and therefore noise will occur. In any case, take into account to check the tread and sidewall of your tires. Another possibility is that your exhaust pipehas a hole in it or a collar has become loose. Keep in mind to go under your Fiat Panda while the engine is running and check the sound of your exhaust pipe to identify possible exhaust gas leaks. If you detect of a loud noise but the cause is not present here, we recommend highly that you go through this content page about loud noise on Fiat Panda, which might possibly give you more ideas.
Rear end noise slamming Fiat Panda because of your suspension
If you experience a clicking noise on the rear axle of your Fiat Panda, it is conceivable that the suspension portion of your automobile may be damaged. In fact, when the steering unit of your automobile is activated, the damping unit of your automobile may be the cause of the trouble. In fact, it is not abnormal for the shock absorber cup to be out of order or for the shock absorber bearings to be out of order. Keep in mind to check the condition of these two units. For more information, read our article on suspension noise on Fiat Panda.
Squeaky noise rear end Fiat Panda caused by your bearings
A squeaking noise in the rear end of your Fiat Panda can also originate from precipitate wear of your bearings. In fact, bearings play a fundamental task in the proper handling of the automobile while driving. When you turn strongly, at high or low speed and bring the direction to a stop, the pressure exerted on the bearings is higher than if you turn slowly, it can make sounds close to a creaking sound if they are worn. Keep in mind to check their condition. If you want more info about bearing noise on Fiat Panda, it’s here.
What if I still haven’t fixed the rear end noise of my Fiat Panda
If you still haven’t found an answer despite the different possibilities described here and the noise from the rear end of your Fiat Panda persists, it is conceivable that the trouble is connected to other mechanical units and that this failure is less common. Feel free to read this article on suspension noise on Fiat Panda which will eventually give you other ideas to support you solve your trouble. Do not leave this trouble lying around in any case and take your car to your mechanic to preserve your automobile and your safety.
