It appears in some cases that your automobile makes noises from your brakes, you are certainly not reassured by this types of noise and you instantly tend to think that you will have an incident or that the fix will cost you an substantial sum. So, what if you identify noise from the brake on your Audi A2? It most likely is not some thing serious and you would be able to solve it on your own, but when in doubt, as with such issue your safety and the one from other is in question, it is better to check before a more serious failure occurs. It is with this in mind that we have decided to write this content and give you the chance to find out the issue and find a solution. We will go through different steps, review all possible sources of brake noise on Audi A2, and deliver you the explanations for them in order to assist you fix the issue.
The different types of brake noise Audi A2 and their origins
The objective of the Audi A2 brakes is to come slow down and stop your vehicule. This element is an essential component of your vehicule’s safety. Experiencing a sound from it must therefore be investigated right away and leaving it lying around is not a good choice.
I notice a grinding noise on my brake Audi A2
If you perceive a grinding or scrap metal noise coming from the brake of your Audi A2, it is highly imaginable that it will be caused by brake pads at the end of their existence, actually, the function of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each producer gives an average runtime in kilometres for pads, but based on your driving style and route, this may vary. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be replaced quickly as they will quickly affect your discs and keep doing this scrap or grinding noise on Audi A2. If after checking out this point, you’re still having a grinding noise on your Audi A2, have a look at this article to find a solution.
I experience a frequent noise that stops when I brake with my Audi A2
If you notice a regular noise from the brakes Audi A2 that only ends when you press your brake system, it is quite conceivable that caliper wear is the cause. Indeed, they can jam over time, especially if they are not employed enough. In this case, they will tend to stay on in the closed position, so they will constantly stick the pads against the discs, which will lead to an rise in consumption and premature deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not function, it will be necessary to consider swapping them.
I experience vibration when I brake with my Audi A2
If in your case, you experience a vibration when braking that would have come from the brake your Audi A2, you will have to get worried about the condition of your discs. Discs tend to wear over time and although they have a much longer life than pads, they must be changed at some point. A vibration most often shows of veiled brake disc, you can check it by disassembling your wheels. If so, change them or have them replaced by your auto technician.
I feel a squealing noise when I brake with my Audi A2
Finally, if you ewperience a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Audi A2, causing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
