Being subject to regular noise on your automobile tends to be irritating, a automobile is so sophisticated that it is constantly difficult to find its origin and even more so to find the part that generates it. If you have already experienced a clicking noise on your Hyundai Kona, we will most likely be able to support you. In fact, our editorial staff decided to create this document in order to review the main causes of a clicking noise on Hyundai Kona. This is why, firstly, we will check out what are the origins of this type of noise coming from your engine block, then those of a noise coming from your direction and finally, the origins of clicking noise on Hyundai Kona coming from your suspensions.
I perceive a clicking noise on Hyundai Kona on my engine
Check your high engine
If you perceive a clicking noise on Hyundai Kona, and this noise is located at the top of the engine, it means that it originates from your cylinder head and its accompanying parts. Two elements can be the triggers of these ticking noises on Hyundai Kona. Either the hydraulic pushers , in most cases it is because of their faulty “hydraulic catch-up” system that we will notice these clicking noises, often when cold and go away when hot. Otherwise, it is the interplay of your rocker arms or their condition of wear that is at issue. In this case, remember to change them.
Check your low engine
If you have founded the spot of origin of the Hyundai Kona clikcing noises coming from your low engine, it may be that your rods or piston shafts are the triggers. In both situations, the risk in the long term is the breakage of the motor. These two repairs are very complex and most mechanics will suggest you to replace the engine of your Hyundai Kona.
Combustion problem
Finally, if you have the feeling that this clicking noise on Hyundai Kona is connected to the combustion of your engine, there are three possible origins of it. Check the state of your glow plugs which, if worn, can hinder the proper combustion of the fuel mixture. Then, it is plausible that your timing belt is shifted and that it does not properly manage the timing of the various engine components to promote good combustion. And finally, the most classic trigger, comes from your injection, which is either blocked or one or more injectors are injured. In this circumstance, do not hesitate to consult this document which deals in detail with the different injection sounds on Hyundai Kona.
I perceive a clicking noise on Hyundai Kona in my direction
Check the state of the gimbals
One of the most basic causes of a clicking noises in the direction of your Hyundai Kona is linked to the direction of the automobile. Indeed, the cardans and their bellows are parts that are constantly stressed during your changes of direction or that you turn your wheels and a wear of one of them can create a ticking type of sound when you get closer to the stop zone of your steering. A bellows with holes will damage the cardan shaft very quickly and must be swapped rapidly, otherwise the entire cardan shaft will have to be swapped. Consider taking a look at it. If you would like more detailed information about gimbals noises on Hyundai Kona, do not hesitate to consult this complete guide.
Check the rest of your direction
Finally, when you find out a clicking noise on your Hyundai Kona, it is plausible that it is the direction that is involved. Just like the gimbals, the steering part is mobilized when you turn your wheels. If this is the circumstance, the parts that may have been damaged due to normal wear and tear or impact (e. g. sidewalks) are steering rods, stabilizer bar silentblocks or steering triangles.
I perceive a clicking noise on Hyundai Kona coming from my suspensions
Check the suspension
If you encounter a clicking noise on your Hyundai Kona when you pass a speed bump, it is extremely plausible that your suspension block is the cause of the noise. In fact, it may be the suspension cups, which, when they are outdated, have the rubber (silentbloc) that acts as a buffer and shock absorber for the upper part of the suspension that no longer fulfils its task and during small jolts that compress the suspensions. To verify if this is the issue that worries you, take a dented road and, at low speed, pay attention to the noise coming from your front axle when ever you pass over holes. If these are the cups, consider changing them quickly as this may damage other parts and require more expensive repairs.
Check spring and cylinder
If you notice a clicking noise on your Hyundai Kona at the suspension level, it is highly plausible that spring wear or shock cylinder deformation may be a reason. To verify the state of the spring, place the car on a flat surface and measure that the heights from the ground to the bottom of the body are identical on each side (empty car for measurement). You can also verify between the front and rear, if there is a gap too significant it suggests that that most likely your springs are worn, if you discover a leak go a little further in the article to have the solution to this problem. For the cylinder the verification is visual, be sure that it seems to work in a straight axis. And that there is no angle that would alter its proper functioning. If one of them breaks in both situations, you should think about swapping it or them. If you have the feeling that this noise is more like a squeaking noise on Hyundai Kona than a clicking noise, don’t hesitate to consult this article.
