Do you perceive a metallic noise on your Peugeot 1007 when you drive? We can understand that this is not pleasurable and that you have questions. Discovering such a noise is not always a good indication, but it may also be nothing major. To help you resolve this issue, our redaction decided to prepare this article to help you in this investigation. In order to execute this research as efficiently as possible, we will first look at the conceivable origins of metallic noise in the front of your automobile, and then, if the metallic noise comes from the rear of your automobile.
Metal noise Peugeot 1007 coming from the front end of the automobile
I perceive a metal rattling noise coming from wheels
- Metallic noise based on your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the most likely triggers of metal noise symptoms on your Peugeot 1007, may be that one of your bearing is tired, it will tend to generate a loud noise that goes up when stressed (turns faster and faster). So bear in mind to check by taking speed (neutral gear and window open to listen only to noise of the wheels) that the noise is well based here, if this is the case replace it or them promptly. If, on the other hand, this noise only manifests itself with an engaged speed, browse this guide on loud noise on Peugeot 1007, you will most likely find a remedy to your issue.
If you discern a metalic noise on Peugeot 1007 and you have the feeling that it comes from your front wheels, it is highly conceivable that it is your pads or discs that are the cause. Indeed, a disc or a set of dead plates will generate a strong metallic friction noise that you will inevitably feel. To check this, put your automobile on safety stand, and check the state of your discs and pads by taking out the wheel. If they are involved, replace them promptly , otherwise you will no longer be able to brake. If you encounter a metallic noise from your automobile, and you want informations about it, go through this guide for more info about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you perceive a metallic noise on your Peugeot 1007, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will trigger a metallic snap when they hit or change direction. To check this, position yourself under your automobile, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be changed. If this is your case, we advise that you browse this article for a complete guide about steering noises on Peugeot 1007.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A bit like worn stabilizer bar, if your engine silent blocks are damaged, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Peugeot 1007. Once screwed up, they will no longer fulfill their function as shock absorbers and, with each impact, or violent acceleration, a noise will come out. Therefore, think about to check their status and replace them if needed. Feel free to browse this article which is a complete file about strut mounts noises on Peugeot 1007, how to check their state and change them.
Finally, the last classic cause of metallic noise on Peugeot 1007. It’s because your transmission system is the origin. It is conceivable, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then generate a continuous metal rattling sound. That you shouldn’t feel in neutral. If this is your case, we advise that you read this detailed guide on the sources of steering noises on Peugeot 1007.
Metallic noise Peugeot 1007 coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you are subject to an exhaust noise that is more of a metallic type, it is conceivable that one or more parts of your exhaust may be damaged. Indeed, it is conceivable that either the catalyst or the silencer may be the cause of this sound. To be sure, go under the automobile, cold, and knock each of the previously stated elements with a hammer to locate the origin of the noise. You should perceive things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be necessary to reflect on changing it, as well as the silencer. In this instance, to stop the metallic noise on your Peugeot 1007, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your automobile, it is conceivable that with wear they are at the origin of your metallic noises on your Peugeot 1007. Go a little further up in the content page where you will find details of the solution already exposed for the front part of the automobile.
Finally, if the noise comes from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
