Do you experience a metallic noise on your Seat Ateca once you drive? We understand that this is not enjoyable and that you have questions. Listening such a noise is not always a good indication, but it may also be nothing serious. To support you resolve this trouble, our redaction decided to create this content to help you in this investigation. In order to perform this research as accurately as possible, we will first check out the plausible origins of metallic noise in the front of your car, and then, if the metallic noise comes from the rear of your car.
Metal noise Seat Ateca coming from the front end of the car
I acknowledge a metal rattling noise coming from wheels
- Metallic noise caused by your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the probable causes of metal noise symptoms on your Seat Ateca, may be that one of your bearing is tired, it will commonly generate a loud noise that raises when stressed (turns faster and faster). So please remember to examine by taking speed (neutral gear and window open to listen only to noise of the wheels) that the noise is well established here, if this is the case replace it or them quickly. If, on the other hand, this noise only manifests itself with an engaged speed, read this report on loud noise on Seat Ateca, you will most likely find a solution to your trouble.
If you experience a metalic noise on Seat Ateca and you have the feeling that it comes from your front wheels, it is highly plausible that it is your pads or discs that are the cause. Indeed, a disc or a set of dead plates will make a strong metallic friction noise that you will inevitably feel. To examine this, put your car on safety stand, and examine the state of your discs and pads by removing the wheel. If they are involved, replace them quickly , otherwise you will no longer be able to brake. If you encounter a metallic noise from your car, and you want infos about it, go through this article for more info about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you acknowledge a metallic noise on your Seat Ateca, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will trigger a metallic snap when they hit or change direction. To examine this, put yourself under your car, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be swapped. If this is your case, we recommend highly that you read this content for a complete guide about steering noises on Seat Ateca.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A little like worn stabilizer bar, if your engine silent blocks are damaged, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Seat Ateca. Once screwed up, they will no longer fulfill their role as shock absorbers and, with each impact, or violent acceleration, a noise will occur. Therefore, think about to examine their status and replace them if needed. Feel free to have a look at this content which is a complete file about strut mounts noises on Seat Ateca, how to examine their state and replace them.
Finally, the last common cause of metallic noise on Seat Ateca. It’s because your transmission system is the source. It is conceivable, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then make a continuous metal rattling noise. That you shouldn’t feel in neutral. If this is your case, we recommend highly that you look at this detailed guide on the sources of steering noises on Seat Ateca.
Metallic noise Seat Ateca coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you hear an exhaust noise that is more of a metallic type, it is plausible that one or more parts of your exhaust may be damaged. Indeed, it is plausible that either the catalyst or the silencer may be the cause of this noise. To be certain, go under the car, cold, and knock each of the previously stated elements with a hammer to determine the source of the noise. You should notice things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be necessary to consider swapping it, as well as the silencer. In such a case, to stop the metallic noise on your Seat Ateca, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your car, it is plausible that with wear they are at the origin of your metallic noises on your Seat Ateca. Go a little further up in the article where you will find details of the solution already exposed for the front part of the car.
Finally, if the noise comes from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
