It happens in some cases that your car makes noises in the brake calipers, you are almost never reassured by this kind of noise and you immediately tend to think that you will have an incident or that the repair will cost you an substantial amount. So, what if you discern noise from the brake calipers on your Hyundai Ix20? It may not be some thing severe and you may be able to solve it yourself, but when in doubt, since your safety and the one of others is in question, it is better to verify before a more serious failure happens. It is with this in mind that we have made the decision to compose this article and give you the chance to find out the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Hyundai Ix20, and give you the reasons for them in order to help you resolve the issue.
The different types of brake caliper noise on Hyundai Ix20 and their causes
The objective of the Hyundai Ix20 brake calipers is to come pinch the brake discs of your Hyundai Ix20 thanks to the pads they will activate. This component is an fundamental element of your vehicle’s safety. Hearing a noise from it must therefore be investigated quickly and leaving it lying around is not a good alternative.
I hear a grinding noise on my brake calipers on Hyundai Ix20
If you find out a grinding or scrap metal noise coming from the brake calipers of your Hyundai Ix20, it is highly possible that it will be caused by brake pads at the end of their existence, indeed, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each producer gives an average runtime in kilometres for pads, but according to your driving style and route, this may differ. Remove the wheels in question and check the wear indicator on them. If they are out of date, they must be swapped quickly as they will quickly ruin your discs and keep doing this scrap or grinding noise on Hyundai Ix20. If after checking this point, you’re still experiencing a grinding noise on your Hyundai Ix20, have a look at this article to find a solution.
I feel a constant noise that stops when I brake from my Hyundai Ix20 brake calipers
If you are the victim of a continual noise in the brake calipers of your Hyundai Ix20 that only stops when you press your brake system, it is quite possible that caliper wear is the cause. In fact, they can jam after some time, especially if they are not employed enough. In such a case, they will tend to stay in the closed situation, so they will always stick the pads against the discs, which will lead to an rise in consumption and premature deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Hyundai Ix20
If in your case, you feel a vibration when braking that would have come from the brake calipers of your Hyundai Ix20, you will have to get worried about the state of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be substituted at some point. A vibration most often notifies of veiled brake disc, you can check it by disassembling your wheels. If so, change them or have them replaced by your technician.
When I brake, I feel a squealing in my brake calipers of my Hyundai Ix20
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Hyundai Ix20, causing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
