It happens in some cases that your automobile makes noises in the brake calipers, you are almost never reassured by this kind of noise and you automatically tend to think that you will have an accident or that the repair will cost you an astronomical amount of money. So, what if you detect noise from the brake calipers on your Ford C-max 2? It most likely is not some thing severe and you may be able to fix it yourself, but when in doubt, since your safety and the one of others is in question, it is better to verify before a more serious failure happens. It is with this in mind that we have chosen to create this content and give you the chance to find the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Ford C-max 2, and give you the causes for them in order to help you resolve the trouble.
The different types of brake caliper noise on Ford C-max 2 and their causes
The objective of the Ford C-max 2 brake calipers is to come pinch the brake discs of your Ford C-max 2 thanks to the pads they will activate. This component is an essential element of your vehicle’s safety. Discovering a noise from it must therefore be examined promptly and leaving it lying around is not a good solution.
I hear a grinding noise on my brake calipers on Ford C-max 2
If you notice a grinding or scrap metal noise coming from the brake calipers of your Ford C-max 2, it is highly imaginable that it will be connected to brake pads at the end of their existence, actually, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each company gives an average runtime in kilometres for pads, but according to your driving style and route, this may differ. Remove the wheels in question and check the wear indicator on them. If they are expired, they must be swapped quickly as they will very easily affect your discs and keep doing this scrap or grinding noise on Ford C-max 2. If after examining this point, you’re still feeling a grinding noise on your Ford C-max 2, have a look at this article to find a solution.
I encounter a continuing noise that stops when I brake from my Ford C-max 2 brake calipers
If you are the victim of a continuous noise in the brake calipers of your Ford C-max 2 that only stops when you press your brake system, it is quite possible that caliper wear is the cause. In fact, they can jam with time, specifically if they are not used enough. In such a case, they will tend to remain in the closed position, so they will always stick the pads against the discs, which will lead to an rise in consumption and precipitate deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Ford C-max 2
If in your case, you encounter a vibration when braking that would have come from the brake calipers of your Ford C-max 2, you will have to get worried about the condition of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be changed at some point. A vibration most often informs of veiled brake disc, you can check it by removing your wheels. If so, replace them or have them replaced by your mechanic.
When I brake, I encounter a squealing in my brake calipers of my Ford C-max 2
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Ford C-max 2, causing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
