It happens sometimes that your automobile makes noises in the brake calipers, you are certainly not reassured by this types of noise and you immediately tend to think that you will have an incident or that the repair will cost you an substantial amount. So, what if you identify noise from the brake calipers on your Ford Puma? It is probably not anything major and you may be able to solve it yourself, but when in doubt, since your safety and the one of others is in question, it is better to check before a more serious failure happens. It is with this in mind that we have chosen to compose this article and give you the chance to find the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Ford Puma, and give you the explanations for them in order to help you resolve the issue.
The different types of brake caliper noise on Ford Puma and their causes
The objective of the Ford Puma brake calipers is to come pinch the brake discs of your Ford Puma thanks to the pads they will activate. This component is an fundamental element of your vehicle’s safety. Hearing a sound from it must therefore be investigated right away and leaving it lying around is not a good answer.
I hear a grinding noise on my brake calipers on Ford Puma
If you find out a grinding or scrap metal noise coming from the brake calipers of your Ford Puma, it is highly conceivable that it will be related to brake pads at the end of their existence, actually, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each company gives an average runtime in kilometres for pads, but based on your driving style and route, this may vary. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be replaced quickly as they will quickly damage your discs and keep doing this scrap or grinding noise on Ford Puma. If after verifying this point, you’re still enduring a grinding noise on your Ford Puma, have a look at this article to find a solution.
I encounter a regular noise that stops when I brake from my Ford Puma brake calipers
If you are the victim of a uninterrupted noise in the brake calipers of your Ford Puma that only stops when you press your brake system, it is quite plausible that caliper wear is the cause. Indeed, they can jam as time passes, specifically if they are not used enough. When this happens, they will tend to keep on being in the closed position, so they will always stick the pads against the discs, which will lead to an rise in consumption and precipitate deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Ford Puma
If in your case, you encounter a vibration when braking that would have come from the brake calipers of your Ford Puma, you will have to worry about the state of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be swapped at some point. A vibration most often notifies of veiled brake disc, you can check it by disassembling your wheels. If so, change them or have them replaced by your auto technician.
When I brake, I encounter a squealing in my brake calipers of my Ford Puma
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Ford Puma, producing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
