If you too have already feel a grinding noise on Ford Tourneo, you must have asked yourself the same questions as all Ford Tourneo owners. We are rarely reassured when a grinding noise shows up on our automobile. As we are conscious of your doubts and questions, we have made a decision to write this article content in order to support you in and facilitate your search for a answer to your issue. To do this, first we will see what the sources of a grinding noise on Ford Tourneo are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Ford Tourneo that comes from the shock absorbers and to finish from one of your doors.
I notice a grinding noise on Ford Tourneo once I turn the wheel
First, we will take a look at the grinding noises on Ford Tourneo that take place every time you turn the wheel of your automobile. Here are the main causes for this:
- Hydraulic system
- Bearings
- Steering pump
- You have an oil leak at a shock absorber, it is up to you to check that there is no oil leaking from your shock absorbers.
- You may experience abnormal wear and tear on one of the seals. This would cause an oil leak
- Finally you can have one of your shock absorber cylinders deformed, which will create a grinding noise on Ford Tourneo
If you are subject to grinding noises on your Ford Tourneo once you turn the wheels, it may be connected to the hydraulic system of your automobile that allows you to operate the entire power steering part. In this case, the main point to check is the power steering fluid level, which if below the normal level could be an indicator of a leak of the device. In this case, bear in mind to redo the level and check it frequently. If the issue persists, go to your mechanic.
“A grinding noise on Ford Tourneo once I turn the wheels of my automobile” can also be a consequence of premature wear of your bearings. Indeed, bearings play an essential role in the good behaviour of the automobile when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can make sounds close to a grinding if they are worn. Think about to check their condition.
Finally, a grinding noise on Ford Tourneo once I turn may be relating to a tired steering pump power steering pump. The mission of this organ is to operate the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may surface between it and the belt. Keep in mind to check that it is working properly.
If despite these different possibilities you continue to notice a grinding noise on Ford Tourneo when turning your steering wheel, we have made a complete content on this subject that can support you find the origin.
I hear a grinding noise on Ford Tourneo once braking
If you notice a grinding noise from the brakes of your Ford Tourneo, it is highly possible that it will be associated with brake pads at the end of their life, indeed, the task of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but depending on your driving style and route, this may vary. Remove the wheels in question and check the wear indicator on them. If they are dead they will have to be substituted quickly because they will quickly damage your discs.
If, despite verification, your grinding noise on Ford Tourneo does come from your brakes but is not connected to the pads, check this article to find out the other possible origins of brake noises on Ford Tourneo.
I notice a grinding noise on Ford Tourneo at the shock absorbers
If you are in the situation where you find the grinding noise on Ford Tourneo as coming from the damping part of your automobile, whether you are driving over a retarder, on a bumpy road, or simply once you change direction and the vehicle’s mass is swung from one side to the other. In this instance, there are several causes that can justify this noise. Indeed, you will have to check some points, here they are:
at each compression.
Once you have tested all these elements, you should have found the origin of your problem, go to your mechanic to fix the faulty part. If you have not located the origin of your issue, we recommend that you take a look at this article which discusses all possible origins of shock absorber noise on Ford Tourneo.
I notice a grinding noise on Ford Tourneo at a door
If that’s not enough, don’t hesitate to read this full article on door sounds on Ford Tourneo.
It is possible, based on the type of noise you know, that the hinge of your door is at the origin of these noises. If this is the case, you will have to check it by opening your door and verifying that
