It appears in some cases that your automobile makes noises from your brakes, you are pretty much never reassured by this sort of noise and you immediately tend to think that you will have an accident or that the repair will cost you an substantial amount of money. So, what if you find noise from the brake on your Ford Tourneo? It may not be anything serious and you might have the ability to fix it on your own, but when in uncertainty, as with such issue your security and the one from other is in question, it is better to verify before a more serious failure occurs. It is with this in mind that we have decided to write this article and give you the chance to find the issue and find a solution. We will go through several steps, review all plausible sources of brake noise on Ford Tourneo, and give you the reasons for them in order to support you resolve the issue.
The several sort of brake noise Ford Tourneo and their triggers
The objective of the Ford Tourneo brakes is to come slow down and stop your automobile. This element is an fundamental element of your car’s safety. Experiencing a noise from it must therefore be looked into right away and leaving it lying around is not a good solution.
I hear a grinding noise on my brake Ford Tourneo
If you notice a grinding or scrap metal noise coming from the brake of your Ford Tourneo, it is highly possible that it will be linked to brake pads at the end of their life, indeed, the function of the pads is to act as a buffer during braking and they will therefore logically wear out as time passes. Each company gives an average runtime in kilometres for pads, but according to your driving style and route, this may fluctuate. Take off the wheels in question and verify the wear indicator on them. If they are out of date, they must be changed quickly as they will very easily damage your discs and keep doing this scrap or grinding noise on Ford Tourneo. If after looking at this point, you’re still going through a grinding noise on your Ford Tourneo, have a look at this article to find a solution.
I encounter a continuous noise that stops when I brake with my Ford Tourneo
If you discover a uninterrupted noise from the brakes Ford Tourneo that only ends when you press your brake system, it is quite possible that caliper wear is the reason. In fact, they can jam as time passes, specifically if they are not used enough. In such a case, they will tend to keep on being in the closed position, so they will constantly stick the pads against the discs, which will lead to an increase in consumption and premature deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider changing them.
I encounter vibration when I brake with my Ford Tourneo
If in your case, you encounter a vibration when braking that would have come from the brake your Ford Tourneo, you will have to be concerned about the condition of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be replaced at some point. A vibration most often notifies of veiled brake disc, you can verify it by disassembling your wheels. If so, change them or have them replaced by your auto mechanic.
I notice a squealing noise when I brake with my Ford Tourneo
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Ford Tourneo, causing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
