If you too have already notice a grinding noise on Bmw Serie 1 F20, you must have asked yourself the same questions as all Bmw Serie 1 F20 owners. We are rarely reassured when a grinding noise happens on our automobile. As we are conscious of your concerns and questions, we have decided to compose this content to be able to support you in and facilitate your search for a solution to your problem. To do this, first we will see what the sources of a grinding noise on Bmw Serie 1 F20 are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Bmw Serie 1 F20 that comes from the shock absorbers and to finish from one of your doors.grinding-noise-bmw-serie-1-f20

I listen a grinding noise on Bmw Serie 1 F20 when I turn the wheel

First, we will check out the grinding noises on Bmw Serie 1 F20 that occur every time you turn the wheel of your automobile. Here are the main causes for this:

  • Hydraulic system
  • If you hear grinding noises on your Bmw Serie 1 F20 when you turn the wheels, it may be relating to the hydraulic system of your automobile that allows you to run the entire power steering part. In such a case, the main point to verify is the power steering fluid level, which if below the normal level could be an indication of a leak of the unit. In this case, bear in mind to redo the level and verify it frequently. If the problem lasts, go to your mechanic.

  • Bearings
  • “A grinding noise on Bmw Serie 1 F20 when I turn the wheels of my automobile” can also originate from premature wear of your bearings. In fact, bearings play an essential role in the good behaviour of the automobile when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can generate sounds close to a grinding if they are worn. Take into account to verify their condition.

  • Steering pump
  • Finally, a grinding noise on Bmw Serie 1 F20 when I turn may be related to a tired steering pump power steering pump. The mission of this organ is to run the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may appear between it and the belt. Bear in mind to verify that it is working properly.

    If despite these different possibilities you continue to encounter a grinding noise on Bmw Serie 1 F20 when turning your steering wheel, we have produced a complete article content on this subject that can help you find the origin.

    I experience a grinding noise on Bmw Serie 1 F20 when braking

    If you listen a grinding noise from the brakes of your Bmw Serie 1 F20, it is highly imaginable that it will be linked with brake pads at the end of their life, in fact, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but according to your driving style and route, this may vary. Take out the wheels in question and verify the wear indicator on them. If they are dead they will have to be substituted almost instantly because they will almost instantly damage your discs.
    If, despite crontrol, your grinding noise on Bmw Serie 1 F20 does come from your brakes but is not relating to the pads, verify this article to find out the other conceivable origins of brake noises on Bmw Serie 1 F20.

    I listen a grinding noise on Bmw Serie 1 F20 at the shock absorbers

    If you are in the situation where you identify the grinding noise on Bmw Serie 1 F20 as coming from the damping part of your automobile, whether you are driving over a retarder, on a bumpy road, or simply when you change direction and the vehicle’s mass is swung from one side to the other. In this case, there are several causes that can explain this noise. In fact, you will have to verify some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to verify that there is no oil leaking from your shock absorbers.
    • You may encounter abnormal wear and tear on one of the seals. This would end in an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will create a grinding noise on Bmw Serie 1 F20

    at each compression.
    Once you have checked all these areas, you should have found the source of your trouble, go to your auto technician to fix the defective component. If you have not identified the source of your problem, we would suggest that you look at this article which discusses all possible origins of shock absorber noise on Bmw Serie 1 F20.

    I listen a grinding noise on Bmw Serie 1 F20 at a door

    If that’s not enough, don’t hesitate to look at this full article on door sounds on Bmw Serie 1 F20.
    It is conceivable, determined by the type of noise you acknowledge, that the hinge of your door is at the origin of these noises. If this is the case, you will have to examine it by opening your door and examining that the grinding noise on your Bmw Serie 1 F20 comes from a hinge that is too dry. To solve this problem, first try to grease the hinge, in most cases this is enough to solve your problem. If that’s not enough, don’t hesitate to check out this complete article on door sounds on Bmw Serie 1 F20.