Sometimes your car can make noises in the front axle, you are very almost never reassured by this types of noise and you straightaway tend to think that you will lose a wheel or that the fix will cost you an astronomical sum. So, what if you discern a noise coming from a gimbals of your Toyota C-hr? It may not be much and you can repair the issue yourself, but if in doubt it is better to check before a larger problem takes place. It is with this in mind that we have decided to produce this document and allow you to discover the issue and find a treatment. We will, through few steps review all the components that can generate noises at the front end of your Toyota C-hr. 
What are the elements that can cause a noise close to gimbals on Toyota C-hr?
Most of our job will focus on finding the element that gives your Toyota C-hr gimbals noise. The following is a list of the components that are most likely to be creating it and how to verify it.
Noise vibration that sounds like gimbals on Toyota C-hr : the shock absorber cup
One of the most likely causes of noises on Toyota C-hr that sounds like a gimbals is advanced wear and tear on your suspension system. Indeed, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer fulfils its role and during small jolts that compress the suspensions. To check if this is the issue that worries you, take a dented, slow-speed road and focus on the noise coming from your front end as you pass over holes. If these are the cups, consider changing them as soon as possible as this may damage other components and require more costly repairs.
Noise while turning that sounds like gimbals Toyota C-hr : stabilizer bar
If you know of a noise on your Toyota C-hr that sounds like a gimbals when you are turning flat or climbing on sidewalks for example, it is most likely linked to one of the parts of your stabilizer bar that is malfunctioning. To verify the origin of the issue, you may feel a lack of balance in the direction of the vehicle (it pulls to the left or it pulls to the right). Furthermore, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels vigorously, if you hear a clicking sound it is highly conceivable that your silentblocks of stabilizer bar are dead. In this case, go to your garage.
Noise when turning Toyota C-hr : gimbals
One of the most common causes when noise appearsand sounds like gimbals on your Toyota C-hr when you turn with your vehicle is connected to the direction of your vehicle. Indeed, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can generate “Clac clac” type noises when you reach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on your Toyota C-hr, do not hesitate to consult this article to find the solution to your problem.
