It is rarely pleasant to find out a sound you don’t know about, and which originates from your car. Thus, what if you discover an exhaust noise that is persistant on your Chrysler 200? It is highly possible that this is a small trouble, however, before being sure, it is better to execute some investigations. Our team has created this to support you fix it. First, we will look at the possible reasons if you have a muffled exhaust sound on your Chrysler 200 and second, if you have a metallic rattling noise on your Chrysler 200.
Muffled exhaust noise Chrysler 200
Exhaust pipe with holes Chrysler 200
Having a muffled sound from its exhaust is not insignificant and can end in over-consumption, or a malfunction of the car engine, which could after a while become dirty, for example. If you have an exhaust noise on your Chrysler 200, it is possible that it is due to a crack in the exhaust pipe, this is the most regular cause. To be able to confirm this, locate someone under the running motor vehicle and accelerate to help them find the source of the hole. Once located, if it is not too large you can cold seal it with specific metallic mastic type legs. Otherwise, the section will have to be swapped.
Element dislocated exhaust pipe Chrysler 200
The other possibility of being the subject of a muffled exhaust noise on Chrysler 200 is to have a part of the exhaust system that has dislocated caused by vibrations for example. Indeed some junctions of the different parts of the pot can loosen along with time and induce an exhaust gas leak in places not intended for this goal. These fumes will then produce a loud noise. Same technique as above, we go under the Chrysler 200 to define the trouble location, and tighten or change the bolts. If you hear a muffled sound but after verifying it doesn’t seem to come from the pot itself, consider looking at this article which gives solutions gives solutions about rear end noises on Chrysler 200.
Metal rattling exhaust sound Chrysler 200
Damaged exhaust muffler noise Chrysler 200
If, on the other hand, you are exposed to an exhaust sound that is more of a metallic type, it is possible that one or more parts of your exhaust may be injured. Indeed, it is conceivable that either your baffles, the catalyst or the silencer are the induce of this noise. To confirm, go under your Chrysler 200, cold, and tap each of the previously stated parts with a hammer to define the source of the noise. You should move things between things in the problematic part, if they are baffles, you can try to push the section a little bit to try to block them and thus limit their movements. If it is a dead catalyst, it will be necessary to consider replacing it, as well as the silencer. In this case, to stop the exhaust noise on your Chrysler 200, you will either have to find a used one and do it yourself, or go to your auto mechanic.
Metal rattling exhaust noise Chrysler 200 : Silentblock, loose pot
Finally, a metallic exhaust noise on your Chrysler 200 may be in connection with a poor attachment of your exhaust to your vehicle. Indeed, over time, vibrations, the pot fasteners on the vehicle chassis can come off. In this case, you need to examine, when cold, that the pot holds well, to try to get it to move in different directions and watch how it reacts. Backwards there should be some play and be able to move but not too much. The closer you get to the engine motor, the more fixed it should be. Visually examine the fasteners for which you have doubts. Finally, it is possible that a silentbloc may have died . In this case it will have to be swapped.
