When you discover unusual noises on your Dodge Durango you commonly tend to be troubled. Specifically when you encounter a noise coming from the release bearing of your Dodge Durango. It is immediately assimilated to an engine trouble and can therefore be serious. As we know that you do not take these trouble lightly, we have chosen to create this content to support you find the triggers and free yourself from this issues as quickly as possible. To do this, we will first focus on the purpose and operation of the release bearing of your clutch, and in a second step we will look in detail at the different release bearing noises on Dodge Durango and their origins.
What is the purpose and operation of the release bearing on Dodge Durango?
Function of the release bearing on Dodge Durango
The release bearing of your Dodge Durango has a crucial purpose in the operation of your entire gearbox system. Indeed, its mission is to liberate the gearbox from the rotation of the engine block via its action. This will allow you to shift gears. It is controlled by the clutch pedal and then by the release fork, which, when it is activated, will press on the clutch and release the gearbox from engine rotation for you allow you to shift gears on your Dodge Durango.
Action of release bearing Dodge Durango
Let’s now look at the technical side, the release bearing is composed of two parts, a first fixed part that slides only when the stop is pulled, or pushed (based on its type) and finally a rotating part that is composed of a bearing that will allow it to stay in contact with the mechanism and follow its rotation.
There are two different types of release bearing Dodge Durango :
- Pulled release bearing
- Hydraulic release bearing
It is the most unconventional of the two types of release bearing . This one, unlike the hydraulic version, is operated by a mechanical pulling system that will release the clutch disc. In this case, the release bearing must be mechanically fixed to the mechanism.
The hydraulic release bearing, although more complicated, is the version most used in modern cars. It is however more complex than the pulled release bearing. Indeed, it will be composed of a hydraulic tube that will receive the pressure immediately from the clutch pedal.
More conventional clutch stop
Release bearing noises Dodge Durango and their origins
I encounter a release bearing noise on Dodge Durango in cases where I drive and it stops when I release my clutch pedal
If you encounter a noise from your gearbox, release bearing or clutch itself when your engine is running, but it ceases when you press your clutch pedal, this noise often sounds like a bell noise, it is highly conceivable that your release bearing is the reason. Make sure that this noise stops when you disengage, in which situation it is time to swap the release bearing of your Dodge Durango.
I encounter a release bearing noise when my pedal is up and I encounter jolts in my foot
If you encounter too much or too little resistance when you press your clutch pedal, and it is connected with jolts that you can encounter in your clutch pedal, then the stop/fork release/blades grouping is deteriorated. Indeed, this noise often comes from the broken fork that no longer allows the device to function normally.
I encounter a grinding noise coming from the release bearing of my Dodge Durango when I try to shift gears and they do not shift
This issues appears most often on models equipped with hydraulic release bearing. It is often linked to a clutch pedal that has little or no resistance. If you are in this situation and you feel a grinding or cracking noise coming from the release bearing of your Dodge Durango, then you probably have a leak coming from your release bearing. It must therefore be changed almost instantly or risk damaging your gearbox in addition to the clutch. If you have a noise coming from the gearbox of your Dodge Durango and it’s not from your release bearing, check this article to have more informations.
