You acknowledge a starter motor noise on your Hyundai Genesis when you start your vehicle. We agree that this is not agreeable and that you have inquiries. Hearing such a noise is not always a good signal, but it may also be nothing major. To assist you solve this problem, our team has chosen to write this article content to assist you in this research. First, we will detail how the starter motor functions on your Hyundai Genesis, and then what starter motor noises you can know on your Hyundai Genesis.
Functioning and various information
Function of a starter motor on Hyundai Genesis
The starter motor is an electric motor whose sole role is to start the engine unit of your vehicle. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Hyundai Genesis is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Hyundai Genesis
- Do not run your starter too long
- Do not use a starter motor on Hyundai Genesis with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the climate is too cold. You should not turn your key for more than a few seconds or you will burn it.
Although when you have a battery that is exhausted, you always want to start your vehicle, the energy it is capable of holding may not be sufficient to furnish the power required by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not fix the trigger of your failure to start repeatedly, your starter may be the future element you will have to swap.
I acknowledge noises from the starter motor of my Hyundai Genesis, what are the origins?
I experience a loud noise from the starter of my Hyundai Genesis
If you listen a starter motor noise on Hyundai Genesis and you have the feeling that it is approaching a loud noise, it is possible that it is the starter motor gears that are at the origin of it. In fact, often when the part has been dismantled for other maintenance, its adjustment in relation to the engine flywheel may no longer be optimal, in which circumstance the gears will be worn down over time and will not slip and will no longer properly activate the engine when starting. Verify the state of the drive pinion, if it is the component resposible of the starter motor noise on your Hyundai Genesis replace it.
If it is a noise in the front of your vehicle but it seems to you after examining not to come from your starter, check this article content about front end noise on Hyundai Genesis which may provide you other leads to solve your noise problem.
I acknowledge a clicking noise of the key running in my neiman but no noise at the starter motor of my Hyundai Genesis
If you acknowledge a clicking noise at the starter motor of your Hyundai Genesis, there are two possible failures related to this sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most typical ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You could have a problem with unplugged cable examine your electrical installation. If after checking this clicking noise on Hyundai Genesis doesn’t come from your starter motor, check this article for more informations.
