Being subject to frequent noise on your automobile tends to be frustrating, a automobile is so elaborate that it is constantly difficult to situate its origin and even more so to find the part that generates it. If you have already experienced a clicking noise on your Hyundai Genesis, we will most likely be able to help you. In fact, our editorial staff decided to write this content page in order to review the main causes of a clicking noise on Hyundai Genesis. This is why, firstly, we will look at what are the reasons of this type of noise coming from your engine block, then those of a noise coming from your direction and finally, the origins of clicking noise on Hyundai Genesis coming from your suspensions.
I listen to a clicking noise on Hyundai Genesis on my engine
Verify your high engine
If you listen to a clicking noise on Hyundai Genesis, and this noise is based at the top of the engine, it means that it comes from your cylinder head and its associated parts. Two elements can be the triggers of these ticking noises on Hyundai Genesis. Either the hydraulic pushers , generally it is because of their faulty “hydraulic catch-up” system that we will notice these clicking noises, generally when cold and disappear when hot. Otherwise, it is the interplay of your rocker arms or their state of wear that is at issue. In this circumstance, remember to change them.
Verify your low engine
If you have identified the zone of source of the Hyundai Genesis clikcing noises coming from your low engine, it may be that your rods or piston shafts are the triggers. In both cases, the risk in the long term is the breakage of the motor. These two fixes are very difficult and most mechanics will advise you to swap the engine of your Hyundai Genesis.
Combustion problem
Finally, if you have the feeling that this clicking noise on Hyundai Genesis is linked to the combustion of your engine, there are three possible triggers of it. Verify the state of your glow plugs which, if worn, can hinder the proper combustion of the fuel mixture. Then, it is plausible that your timing belt is shifted and that it does not properly manage the timing of the various engine parts to promote good combustion. And finally, the most classic reason, comes from your injection, which is either blocked or one or more injectors are destroyed. In this circumstance, do not hesitate to check this content page which deals in detail with the different injection sounds on Hyundai Genesis.
I listen to a clicking noise on Hyundai Genesis in my direction
Verify the state of the gimbals
One of the most common triggers of a clicking noises in the direction of your Hyundai Genesis is linked to the direction of the automobile. Indeed, the cardans and their bellows are parts that are constantly stressed during your changes of direction or that you turn your wheels and a wear of one of them can generate a ticking type of sound when you approach the stop zone of your steering. A bellows with holes will harm the cardan shaft very quickly and must be swapped rapidly, otherwise the entire cardan shaft will have to be swapped. Consider taking a look at it. If you would like more detailed information about gimbals noises on Hyundai Genesis, do not hesitate to read this complete guide.
Verify the rest of your direction
Finally, when you detect a clicking noise on your Hyundai Genesis, it is plausible that it is the direction that is involved. Just like the gimbals, the steering part is mobilized when you turn your wheels. If this is the circumstance, the parts that may have been damaged due to normal wear and tear or impact (e. g. sidewalks) are steering rods, stabilizer bar silentblocks or steering triangles.
I listen to a clicking noise on Hyundai Genesis coming from my suspensions
Verify the suspension
If you encounter a clicking noise on your Hyundai Genesis when you pass a speed bump, it is very plausible that your suspension block is the reason of the noise. In fact, it may be the suspension cups, which, when they are out of date, have the rubber (silentbloc) that acts as a buffer and shock absorber for the upper part of the suspension that no longer fulfils its task and during small jolts that compress the suspensions. To examine if this is the problem that concerns you, take a dented road and, at low speed, pay attention to the noise originating from your front axle when you pass over holes. If these are the cups, consider changing them quickly as this may affect other parts and require more expensive repairs.
Check spring and cylinder
If you hear a clicking noise on your Hyundai Genesis at the suspension level, it is widely plausible that spring wear or shock cylinder deformation may be a explanation. To examine the state of the spring, position the vehicle on a flat surface and measure that the heights from the ground to the bottom of the body are similar on each side (empty car for measurement). You can also examine between the front and rear, if there is a gap too large it suggests that that most likely your springs are worn, if you observe a leak go a little further in the article to have the answer to this problem. For the cylinder the verification is visual, make sure that it seems to work in a straight axis. And that there is no angle that would alter its proper functioning. If one of them breaks in both situations, you should consider replacing it or them. If you have the feeling that this noise is more like a squeaking noise on Hyundai Genesis than a clicking noise, don’t hesitate to consult this article.
