Constantly hearing noises from your car is never pleasurable, so hearing wiper sounds on your Subaru Outback can be stressing. This indication may be an indication of a insignificant issue as well as a warning of a insignificant service to come. No matter the reason, it is important to check the source and take the necessary actions to correct the issue, it is with this in mind that we decided to create this content page to help you see more clearly. We will first look into the conceivable reasons and solutions for dealing with noise from your wipers on your Subaru Outback. Then, in a second step, we will give you some recommendations to prevent this type of noise from occurring again.
Wiper blades that causes a squeaking or rubbing noise on Subaru Outback
A wiper noise on your Subaru Outback, whether it is a squeak noise or rather a rubbing noise on your windshield, is not pleasurable and can distract your focus while you are driving. It is necessary to fix such a noise. Moreover, a wiper blade noise is mostly the signal of a future malfunction of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.
Reasons and solutions for wiper noise on your Subaru Outback
- Examine the wear of your wiper blades. This is the most basic reason of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Consider swapping them in both situations.
- Dirty windshield, verify the level of your windshield washer fluid. One of the causes of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may hear a wiper noise on your Subaru Outback, it is up to you to clean it with your windshield washer fluid if appropriate, otherwise use sodium bicarbonate to clean it, it is very effective.
- Examine that your wiper blades are well situated. In fact, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can verify these two points.
- Examine the tightness of the wiper arm device and that the friction between the windshield and the wipers is not too high. In fact, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your Subaru Outback happens.
Some universal tips to limit wiper blades noise on your Subaru Outback
Finally, we will give you some suggestions and warnings to help you increase the life of your wipers and avoid unwanted noise they may create during their lifetime.
- Never use dishwashing liquid as windshield washer fluid. In fact, the purpose of the dishwashing liquid is not to wash windows, moreover if you wanted to use it for this objective, you would have to rinse abundantly because it creates a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore experience an increase in the noise of these.
- Do not wax your windshield, the film that the wax will develop may prevent you from seeing the road properly. In fact, this oily film will build a veil and prevent you from draining water through your windshield wipers in a normal way.
- Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
- Since dirt is the main explanation for the noise generated by your windshield wipers, we suggest you not to drive in puddles after storms or heavy rain. In fact, the puddles will inevitably be full of dirt that will end up on your windshield and cause noise or damage to your windshield wipers.
