Repeatedly finding out noises from your car is never enjoyable, so finding out wiper sounds on your Mitsubishi Outlander can be disturbing. This indicator may be an indicator of a insignificant problem as well as a warning of a insignificant repair to come. No matter the reason, it is important to locate the origin and take the necessary measures to correct the problem, it is with this in mind that we desired to prepare this article to support you see more clearly. We will first take a look at the plausible reasons and solutions for dealing with noise from your wipers on your Mitsubishi Outlander. Then, in a second step, we will give you some recommendations to prevent this type of noise from going on again.
Wiper blades that generates a squeaking or rubbing noise on Mitsubishi Outlander
A wiper noise on your Mitsubishi Outlander, whether it is a squeak noise or rather a rubbing noise on your windshield, is not enjoyable and can distract your attention while you are driving. It is necessary to eliminate such a noise. Also, a wiper blade noise is in most cases the signal of a future failure of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.
Reasons and solutions for wiper noise on your Mitsubishi Outlander
- Verify the wear of your wiper blades. This is the most basic cause of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Think about changing them in both cases.
- Dirty windshield, check the level of your windshield washer fluid. One of the causes of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may hear a wiper noise on your Mitsubishi Outlander, it is up to you to clean it with your windshield washer fluid if appropriate, otherwise use sodium bicarbonate to clean it, it is very practical.
- Verify that your wiper blades are well installed. In fact, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can check these two points.
- Verify the tightness of the wiper arm device and that the friction between the windshield and the wipers is not too high. In fact, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your Mitsubishi Outlander shows up.
Some universal recommendations to limit wiper blades noise on your Mitsubishi Outlander
Finally, we will give you some recommendations and warnings to help you extend the life of your wipers and prevent unwanted noise they may create during their lifetime.
- Never use dishwashing liquid as windshield washer fluid. In fact, the purpose of the dishwashing liquid is not to wash windows, furthermore if you wanted to use it for this goal, you would have to rinse abundantly because it causes a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore experience an increase in the noise of these.
- Do not wax your windshield, the film that the wax will create may prevent you from seeing the road properly. In fact, this oily film will create a veil and prevent you from draining water through your windshield wipers in a normal way.
- Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
- Since dirt is the main cause for the noise produced by your windshield wipers, we recommend you not to drive in puddles after storms or heavy rain. In fact, the puddles will inevitably be full of dirt that will end up on your windshield and cause noise or deteriorate to your windshield wipers.
