Repeatedly hearing noises from your car is never pleasant, so hearing wiper sounds on your Mazda CX 3 can be stressing. This sign may be an indication of a insignificant trouble as well as a warning of a insignificant service to come. In any case, it is imperative to find the origin and take the necessary actions to fix the trouble, it is with this in mind that we decided to compose this content page to support you see more clearly. We will first have a look at the possible causes and solutions for dealing with noise from your wipers on your Mazda CX 3. Then, in a second step, we will give you some suggestions to prevent this type of noise from happening again.wiper-blades-noise-mazda-cx-3

Wiper blades that causes a squeaking or rubbing noise on Mazda CX 3

A wiper noise on your Mazda CX 3, whether it is a squeak noise or rather a rubbing noise on your windshield, is not pleasant and can distract your concentration while you are driving. It is imperative to eliminate such a sound. Also, a wiper blade noise is in most cases the sign of a future failure of the wipers, which once worn out will no longer evacuate water well and therefore put you at risk.

Causes and solutions for wiper noise on your Mazda CX 3

  • Examine the wear of your wiper blades. This is the most basic reason of noisy wiper blades. Either because of wear and tear and an almost non-existent rubber or because of the sun that will dry and crack your brushes. Consider replacing them in both situations.
  • Dirty windshield, check the level of your windshield washer fluid. One of the causes of rubbing noise can be the cleanliness of your windshield. If it is too dirty, you may listen to a wiper noise on your Mazda CX 3, it is up to you to clean it with your windshield washer fluid if suitable, otherwise use sodium bicarbonate to clean it, it is very practical.
  • Examine that your wiper blades are well positioned. Indeed, if you feel a kind of jerking of the blades when there is enough rain on your windshield for your wipers to work normally, it is likely that either your arm is a little twisted or the blade attachment is worn. You can check these two points.
  • Examine the tightness of the wiper arm system and that the friction between the windshield and the wipers is not too high. Indeed, when the tightening is too strong, the pressure exerted on the windshield is too strong and a wiper clicking sound on your Mazda CX 3 appears.

Some general recommendations to limit wiper blades noise on your Mazda CX 3

Finally, we will give you some suggestions and warnings to help you expand the life of your wipers and avoid unwanted noise they may cause during their lifetime.

  • Never use dishwashing liquid as windshield washer fluid. Indeed, the purpose of the dishwashing liquid is not to wash windows, furthermore if you wanted to use it for this objective, you would have to rinse abundantly because it causes a strong foam not compatible with the simple wiping of the windshield wiper blades. You will therefore encounter an increase in the noise of these.
  • Do not wax your windshield, the film that the wax will build may prevent you from seeing the road properly. Indeed, this oily film will generate a veil and prevent you from draining water through your windshield wipers in a normal way.
  • Do not use your wipers on a frozen windshield, their rubber parts would definitely be damaged by frost. Wait until you have defrosted this one.
    • Since dirt is the main explanation for the noise produced by your windshield wipers, we encourage you not to drive in puddles after storms or heavy rain. Indeed, the puddles will inevitably be full of dirt that will end up on your windshield and trigger noise or deteriorate to your windshield wipers.